2 . 2 D E . 3 Install the microphone so that the arrow on the top points toward the driver. Instale el microfono de forma que la flecha de la parte superior quede orientada hacia el conductor. Instale o microfone de forma a que a seta da parte superior aponte para o condutor. Installera mikrofonen sa att pilen pa cord as illustrated. Fije el cable del microfono como se ilustra. Prenda o cabo do microfone como se mostra na figura. Satt fast mikrofonsladden pa det satt som visas pa bilden. Be sure

They are for tuner adjustments to be made only by service technicians. •Choose the installation location carefully so the unit will not hamper the driver during driving. •Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. •Use only the supplied mounting hardware for a safe and secure installation. Mounting angle adjustment Adjust the mounting angle to

SEEK +/– control wf CD/MD*1: w; To skip tracks (press up/down); skip tracks continuously (press up/down, then press qf wg up/down again within about 1 second and hold); reverse/fast-forward a track (press wh up/down and hold). Radio: To tune in stations automatically (press wa up/down); find a station manually (press up/down and hold). . MODE button To select the radio band (FM/MW/LW); select the unit*2. . Volume control dial To adjust volume. © 2006 Sony Corporation OFF DSPL/PTY REP SHUF MENU L

• Utilize altifalantes com impedancia de 4 a 8 ohm, e com capacidade admissivel de potencia adequada. Caso contrario, os altifalantes poderao sofrer avarias. • Nao ligue os terminais do sistema de altifalantes ao chassis do automovel, e nao ligue os terminais do altifalante direito aos terminais do altifalante esquerdo. • Nao tente ligar os altifalantes em paralelo. • Nao ligue nenhum sistema de altifalantes activos (com amplificadores incorporados) aos terminais dos altifalantes do aparelho. Ca

(OFF) Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. BA SET UP Setting the clock The clock uses a 24-hour digital indication. 1 Press and hold (SEL). The setup display appears. 2 Press (SEL) repeatedly until “CLOCKADJ” appears. 3 Press (DSPL). The hour indication flashes. 4 Press the volume +/– button to set the hour and minute. To move the digital indication, press (DSPL). 5 Press (SEL). T

They are used for tuner adjustments to be made only by service technicians. •Choose the installation location carefully so that the unit will not interfere with normal driving operations. •Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts. •Use only the supplied mounting hardware for a safe and secure installation. Mounting angle adjustment Adjust the mounting angle to less than 60°. How to detach

as illustrated. microfono entre este y el soporte D como se ilustra. .p„.' . .A.b‡`§J.•'M. ‹[ .@'w‰—fld.@¤..P...C Install the microphone so that the arrow on the top points toward the driver. as illustrated. microfono entre este y el soporte D como se ilustra. .p„.' . .A.b‡`§J.•'M. ‹[ .@'w‰—fld.@¤..P...C Installation for Microphone and Rotary Commander Instalacion del microfono y del mando rotativo ‡`§J.•'M– . ..––¤ „“”.w‚. Parts for installation Componentes de instalacion .w‚...„s. A BC . 2 D E