Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONsin this manual. Please keep the manual in a safe and accessible place for future reference. Before you start Specifications 47 Information for users on collection and disposal of old equipment and used batteries 3 About this unit 3 In case of trouble 4 Resetting the microprocessor 4 Switching the DSP setting mode 4 Switching between RCA input modes 5 Demo mode 5 About this manual 5 Operating this unit Head unit 6 Remote control 6 Set up menu 7 Basic operations 7 Use and care of the remote control 8 Menu operations identical for function settings/audio adjustments/initial settings/ lists 9 Tuner 9 CD/CD-R/CD-RW and external storage devices (USB, SD) 12 iPod 15 Audio adjustments 17 Using Bluetooth wireless technology 30 Initial settings 34 Other functions 35 Additional information Troubleshooting 39 Error messages 40 Handling guidelines 42 Compressed audio compatibility (disc, USB, SD) 43 iPod compatibility 45 Sequence of audio files 45 Bluetooth profiles 45 Copyright and trademark 46 2 En Section Before you start 01 Information for users on collection and disposal of old equipment and used batteries (Symbol for equipment) (Symbol examples for batteries) These symbols are only valid in the European Union. For countries outside the European Union: If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS (radio data system) function only operates in areas with broadcasting RDS signals for FM stations. Before you start These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please CAUTIONThisproductisaclass1laserproductclassifiedundertheSafetyoflaserproducts, IEC60825-1:2007,andcontainsaclass1Mlasermodule.Toensurecontinuedsafety,donotremoveanycoversorattempttogainaccesstotheinsideoftheproduct. Referallservicingtoqualifiedpersonnel. CAUTION—CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. contact your local municipality, your waste ! CAUTION disposal service or the point of sale where you Do not allow this unit to come into contact purchased the items. with liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids. ! The Pioneer CarStereo-Pass is for use only in Germany. ! Always keep the volume low enough to hear outside sounds. 3 En Section 01 Before you start ! Avoid exposure to moisture. ! If the battery is disconnected or discharged, any preset memory will be erased. Note Function setting operations are completed even if the menu is cancelled before the operations are confirmed. In case of trouble Should this unit fail to operate properly, please contact your dealer or nearest authorized PIONEER Service Station. Resetting the microprocessor The microprocessor must be reset in the following situations: ! Before using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages ap pear on the display 1 Remove the front panel. For details, refer to Removing the front panel to protect your unit from theft on page 8. 2 Press RESET with a pen tip or other pointed instrument. RESETbutton Switching the DSP setting mode This unit features two operation modes: the 3way network mode (NW) and the standard mode (STD). You can switch between modes as desired. Initially, the DSP setting is set to the standard mode (STD). ! After switching, reset the microprocessor. WARNING Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers. 1 Use a thin, flathead screwdriver to change the DSP switch on the bottom of this unit. 2 Press RESET with a pen tip or other pointed instrument. Note This unit's audio settings will continue to remain in the memory even if the battery is disconnected or the microprocessor reset. If you want to reset the audio settings, refer to AUDIO reset (audio reset) on page 35. 4 En Section Before you start 01 Switching...