Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
2 Operate the cell-phone to send the phone book data to this unit By operating the cell-phone, download the phone book data to this unit. • Duringdownloading: “Downloading” is displayed. • Aftercompletionofdownloading: “Completed” is displayed. 3 Operate the cell-phone to start the hands-free connection. Clearing the downloading completion message Press any button. . • Up to 600 phone numbers can be registered for each registered cell-phone. • Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetical characters. Fewer characters can be input depending on the type of characters.) • To cancel downloading of the phone book data, operate the cell-phone. D ispla ying the fir m w ar e v ersion You can view the version of the firmware of this unit. 1 Enter the Bluetooth mode Press the [ ] button. “BT MODE” is displayed. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Bluetooth firmware update item Select the following items using the Control knob. “Settings” > “Detailed Settings” > “BT F/W Update” The firmware version appears. 4 Exit the Bluetooth mode Press the [SRC] button. . • For how to update the firmware, access our web site. (button) (button) 54 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 55 ContentsBluetooth setup Function of KDC-X896, KDC-BT852HD Bluetooth detail setting You can configure the initial settings of this unit. 1 Enter the Bluetooth mode Press the [ ] button. “BT MODE” is displayed. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Detailed Settings item Select the following items using the Control knob. “Settings” > “Detailed Settings” 4 Select a desired Bluetooth detail setting item Turn the Control knob to select a Bluetooth detail setting item, and then press the Control knob. Display Description “Detailed Settings” “Auto Answer” Automatically answers a call after lapse of the preset time interval. “OFF”: Does not answer the phone call automatically. “0SEC”: Automatically answers the phone call at once. “1SEC” – “8SEC” – “99SEC”: Automatically answers the phone call after lapse of 1 – 99 seconds. “Auto Reconnect” When set to “ON”, starts re-pairing with the registered Bluetooth device automatically when it becomes unpaired. “ON” / “OFF” “Bluetooth HF/ Audio” Specifies the output speakers for hands-free voice communication and Bluetooth audio sound. “Front” : Outputs sound from the front speakers. “All” : Outputs sound from the front and rear speakers. “Call Beep” Sets whether to output a beep from the speaker when a call comes in. “ON” : Outputs a beep. “OFF” : Does not output a beep. “MIC Gain” Adjusts the sensitivity of the microphone for telephone call or adjusts the voice of the caller. “1” – ”20” – “30” “NR Level” Reduces the noise generated by the surrounding environment without changing the microphone volume or adjusts the voice of the caller when it is not clear. Setting to a positive (+) value enhances the noise reduction effect. “-1” – ”0” – “+1” “Echo Cancel Level” Sets the echo cancellation level. “-1” – ”0” – “+1” ( : Factory setting) 5 Select a Bluetooth detail setting value and determine it Turn the Control knob to select desired setting, and then press the Control knob. The previous item is displayed. 6 Exit the Function setting mode Press and hold the [ ] button. (button) 56 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 57 ContentsSMS (Short Message Service) Function of KDC-X896, KDC-BT852HD Displaying the SMS You can view the SMS received by the cell-phone on the display of this unit. A newly received message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving. When a new message arrives “SMS Received” is displayed. The display disappears with any operation. Displaying the SMS 1 Enter the Bluetooth mode Press the [ ] button. “BT MODE” is displayed. 2 Select the SMS inbox display mode Turn the Control knob to select “SMS Inbox”, and then press the Control knob. 3 Select a message Turn the Control knob. Pressing the [DISP] button each time switches between the display of the telephone number or name and the display of the message reception date. 4 Display the text Press the Control knob. Turn the Control knob to scroll through the message. Press the Control knob to return to the message list screen. 5 Exit the Bluetooth mode Press the [SRC] button. . • The unopened message is displayed at the beginning of the list. Other messages are displayed in the order of reception. • The SMS that is received when the cell-phone is not linked with Bluetooth cannot be displayed. You need to download it. • The received short message(s) cannot be displayed during downloading a new SMS. Downloading the SMS Download the short message (SMS) received by the cell-phone so that it can be read on this unit. 1 Enter the Bluetooth mode Press the [ ]...
Эта инструкция также подходит к моделям:Автомагнитолы - KDC-452U (2.89 mb)
Автомагнитолы - KDC-BT852HD (2.89 mb)
Автомагнитолы - KDC-X496 (2.89 mb)
Ресиверы и усилители - KMR-550U (2.89 mb)