Войти:
Оценок - 2, средний балл: 3 ( )

Инструкция по эксплуатации Kenwood, модель KDC-X789

Производитель: Kenwood
Размер: 2.4 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


2 Enter the Letter Seek mode Press the [1] ("S.MODE") button for at least 1 second. • It doesn't function when (page 35) is ON. • This function is available only when the Play mode is set Genre, Artist, or Album. Canceling the Letter Seek Press the [1] ("EXIT") button. 3 Start the Letter Seek Push the Control knob to [4] or [.]. The initial of Genre name, Artist name, or Album name is displayed and read out by the order. • The announcement of the initial can be canceled by (page49). • When the Control knob is pushed to the reverse of [4] or [.] while Letter Seek, the initial is displayed and read by the reversed order. • When the Letter Seek is started, it cannot be cancelled. 4 Select the song to play Press the Control knob when the initial of the song you are searching is displayed and read. The selected initial group plays. • The category with marks or letters that cannot be read cannot be selected. Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Hold down on [FM] of the Control knob for at least 1 second. English | 37 SIRIUS tuner control features Select SIRIUS Satellite Radio Mode Selecting the SIRIUS Satellite Radio Tuner (optional accessory) connected to this unit. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS to receive the service by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888- 539-SIRIUS TO SUBSCRIBE" appears. • It may take a little time to start receiving after you selected the SIRIUS source. • If the signal receiving fails, "Acquiring Signal" appears. Switching Seek Mode Sets the seeking mode. Press the [AUTO] button. Each time the button is pressed, the Seek mode switches as shown below. Display Operation " Seek Mode Channel" Normal manual seeking control. " Seek Mode Preset" Search in order of the channels in the Preset memory. Select the channel Selecting the channel. Push the Control knob to [4] or [.]. AUTO NEXT 1 – 6 SRC Control knob Band display Channel number AUTO NEXT 1 – 6 SRC Control knob 38 | English SIRIUS tuner control features Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the Control knob. 2 Select the Category Push the Control knob to [FM] or [AM]. • It is the item when the category of Middle text display part is selected. 3 Select the Channel Push the Control knob to [4] or [.]. • Channel search cannot be done until the category information is acquired. Cancelling Category and Channel Search mode Press the Control knob. Function of remote Direct Access Tuning Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. 2 Enter the channel Press the number buttons. 3 Do Channel Search Push the Control knob to [4] or [.]. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • You can set up until Channel number 223. • If there is no signal in the input Channel, "NO CHANNEL" appears. (KTC-SR901: optional accessory) • You cannot search for a channel number which is not broadcasting. (KTC-SR902/KTC-SR903: optional accessory) • If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "Acquiring Signal" appears. Selecting the Preset Band Push the Control knob to [FM]. Each time the knob is pushed, the preset band switches between the SR1, SR2, SR3 and SR4. Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Push the Control knob to [FM]. 2 Select the channel to put in the memory Push the Control knob to [4] or [.]. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons. Refer to (page 9). 4 Put the channel in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [1] — [6] button. • Only the channel number is stored. Category information is not stored. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Push the Control knob to [FM]. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons. 3 Call up the channel Press the desired [1] — [6] button. English | 39 Channel Scan Every receivable Channel is checked for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks. 2 Release it when the song you want to listen to is received Push the Control knob to [4] or [.]. Text Scroll for SIRIUS tuner source Scrolls the displayed channel name and other items. Hold down on [FM] of the Control knob for at least 1 ...

Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-MP628 (2.4 mb)
Автомагнитолы - KDC-MP7028 (2.4 mb)
Автомагнитолы - KDC-MP728 (2.4 mb)
Автомагнитолы - KDC-MP828 (2.4 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории