Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Kenwood, модель KDC-W5541U

Производитель: Kenwood
Размер: 393.34 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


• No USB device comes with this unit. You need to purchase a commercially available USB device. • When connecting the USB device, usage of the CAU1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. English | 15 Appendix Menu Glossary • SWPRE (Switching Preout) Switches the preout between rear output (“REAR”) and subwoofer output (“SUB-W”). • SUPREME Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • CD READ Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. • AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. • NEWS (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing ”NEWS 00M” to ”NEWS 90M” turns this function ON. When this function is ON, the “NEWS” indicator is ON. If news bulletin starts when this function is ON, “TRAFFIC” is displayed and news is received. If ”20M” is has been set, reception of another news bulletin will not start for 20 minutes. The news bulletin volume is the same level that was set for Traffic Information. • SEEK (Tuning mode select) Select a tuning mode of the radio. Tuning mode Display Operation Auto seek “AUTO1” Automatic search for a station. Preset station seek “AUTO2” Search in order of the stations in the Preset memory. Manual “MANUAL” Normal manual tuning control. • AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. • RUSSIAN (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT100 (optional accessory) • POWER OFF (Power OFF Timer) Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power. – – –: Power OFF Timer function is OFF. 20M: Turns the power OFF after 20 minutes. (Factory setting) 40M: Turns the power OFF after 40 minutes. 60M: Turns the power OFF after 60 minutes. • ZONE2 (Dual Zone) Set the destination (front speaker “FRONT” or rear speaker “REAR”) of the sub source (AUX IN) when the Dual Zone function is turned on. • DISPLAY If this unit is not operated at least 5 seconds with “OFF” selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse. 16 | KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041 For operating KCA-BT100 To control KCA-BT100, operate as follows; To make setting for , select

(page 11). Pressing the [38] button for at least 1 second after selecting the "DIALING MODE" item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press [M.JOG] button. To make , , and , press [AUTO] button for at least 1 second. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual Actual displays on this unit “DISCONCT” “HF DISCONCT” “CONNECT” “HF CONNECT” “PHN-DEL” “DEVICE DEL” “P-STATUS” “DVC STATUS” “BT-CON Y” “HF CONNECT Y” “T-CON N” “HF CONNECT N” : Displays the bluetooth connection status. This indicator turns on when a cell-phone is connected to this unit. : Displays the signal strength of cell-phone. : Displays the battery level of cell-phone. This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old El...

Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-W4041 (393.34 kb)
Автомагнитолы - KDC-W4141 (393.34 kb)
Автомагнитолы - KDC-W5041U (393.34 kb)
Автомагнитолы - KDC-W5141U (393.34 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории