Оценок - 4, средний балл: 4 ( )

Производитель: Kenwood Размер: 373.23 kb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Автомагнитолы - KDC-126S (501.94 kb)

Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. — 4— About CDs About CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs CD accessories Don’t use disc CD cleaning Clean from the center of the disc and move outward. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CDs with coloring on the recording surface or that are dirty can’t be used. • This unit can only play the CDs with . It may not correctly play discs which do have the mark. • A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization refer to your CD-R/CD-RW writing and your CD-R/CD-RW recorder manual.) — 5— CD storage • Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. General features General features English Release button (KDC-3026/KDC-2026/KDC-226 only) CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD AM FM . 4 1 3 u d ATT/ Q/ SRC CLK/ LOUD AUD ADJ LOUD indicator SYSTEM Q indicator Clock display ATT indicator Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display Tuner "TUnE" CD "CD" External disc "DISC" (Function of the KDC-3026/KDC-2026) Standby (Illumination only mode) "STBY" Volume Increasing Volume Press the [ u] button. Decreasing Volume Press the [ d] button. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed When it’s ON, the "ATT" indicator blinks. Loudness Compensating Press the — 6— Each time the button is pressed for at least 1 second the Each time the button is pressed for at least 1 second the 4 Adjust the Audio item When it’s ON, "LOUD" indicator is ON. Press the [ 4] or [ . ] button. System Q Adjustment Item Display Range Bass level "BAS" –8 — +8 You can recall the best sound setting preset for different types of the music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Middle level "MID" –8 — +8 Treble level "TRE" –8 — +8 Balance "BL" Left 15 — Right 15 Fader "FD" Rear 15 — Front 15 5 Exit Audio Control mode Press the [AUD] button. Speaker Setting Flat "FLAT" Fine-tuning so that the System Q value is optimal when setting Rock "ROCK" the speaker type. Top 40 "TP40" 1 Enter Standby Pops "POPS" Press the [SRC] button. Jazz "JAZZ" Select the "STBY" display. Easy "EASY" 2 Enter Speaker Setting mode • Each setting value is changed with the 7). First, select the speaker type with the Speaker Press the [Q] button. • When the System Q setting is changed, the Bass, 3 Select the Speaker type Treble set in audio control replace the System Press the [ 4] or [ . ] button. Audio Control Each time the button is pressed the below. 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control Press the [AUD] button 3 Select the Audio Press the [ Each time Speaker type Display OFF "SP-F" For the OEM speaker "SP-O" For 6 & 6x9 in. speaker "SP-6" For 5 & 4 in. speaker "SP-5" 4 Exit Speaker Press the — 7— General features General features Clock Display Press the [CLK] button. Each time the button is pressed the clock display turns ON or OFF. Adjusting Clock 1 Select the clock display Press the [CLK] button. 2 Enter clock adjustment mode Press the [ADJ] button for at least 2 seconds. The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [ 4] or [ . ] button. 4 Exit clock adjustment mode Press the [CLK] button. Function of the KDC-3026/KDC-2026/KDC- DSI (Disabled System Indicator) A red indicator will blink on the removed, warning potential thieves. 1 Turn the power OFF Press the [SRC] button 2 Set the DSI While pressing Each time the OFF. Function of the KDC-3026/KDC-2026/KDC-226 Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoi...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: