Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This can be an advantage when the station reception is poor. The car audio system will select stereo automatically when it is switched on. When reception quality deteriorates, the system will switch to mono playback. Refer to the section on Stereo/Mono in “DSC” programming for information on how to switch from stereo to mono. The playback mode selected is indicated in the display. PTY - Programme Type PTY is an RDS service offered by an increasing number of broadcasting stations. This feature allows you to select FM stations automatically according to their programme type. After you have chosen the PTY preference, the corresponding stations be selected either by seek tuning the scan function. Programme types Switch “PTY” on by pressing the “PTY” button. Use <> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. The following list indicates some of the programme types which are currently available. POP ROCK WEATHER CHILDREN TRAVEL HOBBIES JAZZ OLDIES NEWS SPORT CULTURE Refer to “DSC programming – PTY Lang” to find information on switching the language used to display the programme between German and English. Switching PTY ON/ • Press “PTY” . When the function type selected display and Checking the programme type of the station • Press “PTY” for approximately 2 seconds. After the beep the display will show the programme type offered by the station currently playing. If “NONE” appears in the display, the current station has no PTY code. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. • Press one of the presets 1-6. The selected programme type will be displayed for 2 seconds. • If you would like to listen to a station with this PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, will show “NO PTY” and a beep emitted. The radio will select which was tuned into before activated. You can assign different to each preset position. next section on b) Using the <> buttons on the rocker switch When “PTY” is switched on, you can select a programme type using buttons <>. • Press << or >>; the programme type selected last will be displayed for 3 seconds. • During this period press >> (forwards) or << (backwards) to select the desired type. • Press << or >> as many times as required. • If you would like to listen to a station with the selected PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep will be emitted. The radio will select the station which was tuned into before seek tuning activated. Storing programme types Each of the preset buttons 1-assigned one programme If desired, you can other available programme To do so, make the display. • If necessary, press the “PTY” button to switch on the function. • Select a programme type using buttons <> and hold down the desired preset button (1-6) until you hear a beep. Now the selected programme type can be recalled by pressing this preset as long as “PTY” lights up in the display. Scanning stations with PTY SCAN Important: “PTY” must appear in the display. • Press “SC”. All of the stations in your current reception area offering the selected programme type will be scanned. To switch off PTY-SCAN: • Press “SC” or the rocker switch again. PTY priority Situation: PTY is switched on and lights No station offering the type can be found currently range (with seek . The set will switch tuned As soon as it is possible to receive a programme in the broadcast network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme. Example: --------- Station playing: NDR3. “PTY” lights up in the display. Programme type “POP” selected. Seek tuning is started. No station with “PTY-POP” can be found. The display shows “NO PTY” and automatically switches back to NDR3. NDR2 airs a “PTY-POP” programme. The radio will switch to the linked stati on NDR2 for the duration of the “POP” programme. ENGLISH During CD operation, the set will also switch to the radio programme if the selected PTY becomes available within the broadcast After the PTY programme has ended system will switch back to the previous (radio or CD). Note: As already mentioned, only supported by stations at the present Traffic programme station reception with RDS-EON The abbreviation “EON” stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Many FM radio stations provide their service area with traffic messages at regular intervals. Along with their programmes, all traffic programme stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, “TP” will appear in the displa...
Эта инструкция также подходит к моделям:Автомагнитолы - ACAPULCO RDM 168 (206.01 kb)