Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of this unit in the following way. XM: 1While receiving a SAT Radio band, press or to select channel “0” for XM. The unit displays “CH O” for 5 seconds, then alternately displays “RADIO ID” for 2 seconds and ID number for 10 seconds. While displaying “RADIO ID” as shown above, Demonstration (page 17) become nonfunctional. 2To cancel the ID number display, select the channel other than “0”. SIRIUS: 1While receiving a SAT Radio band, press or to select channel “255” for SIRIUS. 2Press VIEW until the ID No. appears in the display. CHANNEL NO. CATEGORY NAME CHANNEL NAME ID NO. ID NO. COMPOSER NAME CLOCK CHANNEL NO. 3To cancel the ID number display, set the channel to other than “255”. •You cannot use “O”, “S”, “I”, or “F” for the ID Number (XM radio Receiver only). •You can check the ID number printed on a label on your third party, SAT Radio Receiver package. Storing Channel Presets 1Press BAND to select the desired band you want to store. 2After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel. The selected station is stored. 3Repeat the procedure to store up to 5 other channels onto the same band. •To use this procedure for other bands, simply select the band desired and repeat the procedure. •A total of 18 channels can be stored in the preset memory for either XM or SIRIUS. 6 Channels are stored in each band (X1, X2 and X3 for XM; S1, S2 and S3 for SIRIUS). •If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one. Receiving Stored Channels 1Press BAND to select the desired band. 2Press the channel preset button (1 through 6) that has your desired satellite channel in memory. Storing the desired Sports Team (SIRIUS only) Store a favorite team from one of the available leagues SIRIUS covers. Once stored, game times and scores for that team are announced using the interruption ALERT display while receiving other programming. To receive these announcements, refer to page 20. This function becomes effective after performing the following two operations. 1Select the channel broadcasting your favorite team’s game. 2Press F/SETUP to activate the MEMORY/DELETE selection mode. 3Turn the Rotary encoder to select the MEMORY mode, and then press /ENT. MEMORY DELETE MEMORY 4Turn the Rotary encoder to select the desired team for the game being broadcast, and then press /ENT. 5Turn the Rotary encoder to select interruption type, and then press /ENT. TYPE INITIAL TYPE UPDATE (Initial setting) INITIAL: The ALERT display interrupts when the game begins. UPDATE: The ALERT display interrupts by game progress (change of score, game result, etc.). 6Press and hold /ESC for at least 2 seconds to return to normal mode. •If you try to store when the memory area is filled, “MEMORY FULL” is displayed. If you want to replace a team that's already been saved in step 4, turn the Rotary encoder to select “REPLACE YES,” and then press /ENT. •If no operation is perform for 10 seconds, the setting mode is canceled. 1Press and hold F/SETUP for at least 2 seconds to enter the SETUP mode. 2Turn the Rotary encoder to select GAME ALERT, and then press /ENT. 3Turn the Rotary encoder to select the desired league, and then press /ENT. 4Turn the Rotary encoder to select a team you want to store, and then press /ENT. 5Turn the Rotary encoder to select an interruption type, and then press /ENT. TYPE INITIAL TYPE UPDATE (Initial setting) TYPE INITIAL: The ALERT display interrupts when the game begins. TYPE UPDATE: The ALERT display interrupts by game progress (change of score, game result, etc.). 6Press and hold F/SETUP for at least 2 seconds to cancel the SETUP mode. •Pressing /ESC returns to the previous SETUP mode. •If no operation is performed for 60 seconds, SETUP is canceled. •In this mode, a total of 4 teams can be stored in the preset memory (one team per league). Storing the desired Song / Artist (SIRIUS only) A stored song title or artist name is announced whenever a matching title or artist is found on another channel. The interruption ALERT is displayed while listening to a program on another channel. For receiving interruption information, refer to “Recalling the stored information (SIRIUS only)” (page 21). 1Press F/SETUP to active the MEMORY/DELETE selection mode when a Song or the song of an Artist you want to store is being broadcast. 2Turn the Rotary encoder to select the Memory mode, and then press /ENT. MEMORY DELETE 3Turn the Rotary encoder to select the SONG MEMORY or ARTIST MEMO, and then press /ENT. 4Press and hold /ESC for at least 2 seconds to return to normal mode. •If you try to store when the me...