Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Kenwood, модель DNX7100

Производитель: Kenwood
Размер: 5.33 mb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста


К этому устройству также есть другие инструкции:

Фрагмент инструкции


2 Register the phone number Continue to touch more than 2 seconds. To call a phone number from memory: 1 Recall the phone number Make a call . • Only the phone numbers can be registered for Quick Dialing. Therefore, the destination subscriber name and others are not displayed during dialing. Calling by Phone Book You can call a person using his/her phone number that you have registered in the Phone Book. 1 Display the Phone Book screen 2 Select the initial character of a person name in memory The Initial Input screen appears. Initial Input screen 1 1 2 3 1Scrolls the character array display. 2Displays the Phone Book beginning with the name whose first character you have touched. 3Returns to the Hands-Free Control screen. The Phone Book List screen appears. DNX7100 ## : Press for # seconds. 3 4 5 Phone Book List screen 5 4 6 4 7 4Scrolls the list. 5Enters the destination name. 6Cancels the operation. 7Returns to the Hands-Free Control screen. Select a destination you wish to call Confirm the destination The Hands-Free Control screen appears again. The selected destination data is displayed. Make a call 6 End the call The previous screen reappears. . • To use the Phone Book, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Hands Free Box and your cellphone. • Up to 16 characters can be displayed for each name in the Phone Book. • Initials including no corresponding name will not be displayed. • During search, a non-accent character such as "u" is searched for instead of an accent character such as "u". You can start talking when the destination responds. English Hands Free Unit Control Redialing : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears. 1 1 4 3 52 2 You can redial, one of the last 10 phone numbers that you have called or received. 1 Display the Search for Outgoing Calls or Incoming Calls screen Outgoing Calls or Incoming Calls screen 1 Scrolls the list. 2 Enters the destination name. 3 Switches the Redial List between 5 numbers display and single number display. 4 Enters the destination data and returns to the Hands-Free Control screen. 5 Returns to the Hands-Free Control screen. Select a destination you wish to call 3 Confirm the destination The Hands-Free Control screen appears again. The selected destination data is displayed. 4 Make a call You can start talking when the destination responds. End the call 5 The previous screen reappears. . • The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. DNX7100 Setting Up the Hands-Free Phone Setting Up the Hands-Free Phone Selecting a Hands-Free Phone The Hands-Free system can be set as follows. Hands-Free Set Up screen 1 1 2 2 3 4 5 6 1 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 2 Sets a ringing tone output position. ( "Front R") "Front L": Outputs the tone from the front left-hand side speaker. "Front R": Outputs the tone from the front right-hand side speaker. "Front All": Outputs the tone from the both front speakers. 3 Sets the beep of the incoming call. ( "On") "On": Beep is heard. "Off": Beep is canceled. 4 Displays the Phone Select screen. 5 Displays the Phone Delete screen. 6 Returns to the Hands-Free Control screen. . • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. • Select the speaker which is further from the microphone in order to prevent howling or echoes. You can choose the Hands-Free phone from the list. 1 Display the Hands-Free Set Up screen 2 Display the Phone Select list Phone Select screen 1 2 1Selects the cell-phone to be used as a hands-free phone. 2Returns to the Hands-Free Set Up screen. 3 Select a Hands-Free phone you wish to use English Hands Free Unit Control Deleting the Hands-Free Phone . • The Phone Book, outgoing call list, and incoming call list You can cancel a registration of Hands-Free are deleted together with the deleted Hands-Free phone. phone. 1 Display the Hands-Free Set Up screen 2 Display the Phone Delete list Phone Delete screen 1 2 1Selects the cell-phone to be deleted from the list. 2Returns to the Hands-Free Set Up screen. 3 Select a Hands-Free phone you wish to delete DNX7100 English 65 Setup Menu You can set up various receiver parameters. Setup Menu Displays the Setup menu to set various functions. 1 Display the control screen NAV Press several times until the control screen appears. Display the SETUP Menu 2 3 Select the setup item 2 1 2 1The selected setup screen appears. 2Scrolls the setup menu. Audio Setup You can setup a speaker network, etc. 1 Display the Audio SETUP screen Touch [Audio SETUP] in the SETUP Menu (page 66). . • [Audio SETUP] cannot be selected when no source is se...

Эта инструкция также подходит к моделям:
Авто GPS навигаторы - DNX710EX (5.33 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории