"iPod" uses its equalizer function. Select the channel to be adjusted 3 [F] Front speaker [R] Rear speaker [C] Center speaker Set the Graphic Equalizer 4 11 1 Gain level can be adjusted by touching the each frequency bar. [2], [3] Sets a frequency. [5], [.] Sets a gain level. [EQ Init] Returns to the previous level which the gain level is adjusted. [Flat] Tone curve becomes flat. [SW LEVEL] Adjusts the subwoofer volume. DNX9140/DDX814/DDX8034BT Zone Control Zone Control SRS WOW Control You can set the front and rear audio source. 1 2 Display the Zone Control screen Touch [ ] > [] > [Zone Control]. (page 61) Set the Zone Control [Single Zone] Turns off the dual zone. [Front Source] Sets the front audio source. [Rear Source] Sets the rear audio source. . • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. [Rear VOL.] Adjusts the volume of the rear channel. . • There are following limitations when zone function is set to "ON". -There is no output from the subwoofer and the center speaker. - (page 62), (page 63), (page 64), (page 65), (page 80), (page 80), (page 82), and (page 83) are not available. Display the SRS WOW Control screen Touch [ ] > [ ] > [SRS WOW]. (page 61) Set the SRS WOW Control You can set up the SRS WOW effect. 1 2 11 1 Sets a SRS WOW. You can select any of the following sound fields. "OFF"/ "LOW"/ "MIDDLE"/ "HIGH"/ "USER" SRS WOW User Setup 1 Display the Audio SRS Adjust screen 2 Adjust the Audio SRS 11 1 Selects a speaker to be set (Front, Rear or Center speaker). [TruBass] Sets the TruBass effect level. [FOCUS] Sets the FOCUS effect level. [SRS 3D] Sets the SRS 3D effect level. . • FOCUS: Adjusts the vertical position of the speaker and sound image by virtual adjustment. • TruBass: Assists the playback for the super bass sound. • SRS 3D: Makes a natural 3D sound field. • Some items cannot be adjusted depending on the selected speaker. • SRS WOW control is not available in tuner source, TV source and HD Radio source. English Audio Control Surround Control You can set up the sound field. 1 Display the Surround Control screen Touch [ ] > [] > [Surround Control]. (page 61) 2 Set the Surround Control 11 1 Sets a sound field. You can select any of the following sound fields. "Bypass"/ "Bypass+Center"/ "Dolby PLII Movie"/ "Dolby PLII Music"/ "Dolby PLII Matrix" [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, SDDS, AAC or MP3/WMA), input channels (front or rear channels), and sampling frequency are displayed. . • When you have selected the TV or TUNER source and when you set the Dolby PL, we recommend you to select the "Dolby PLII Matrix" mode. If you select another Dolby PLII mode, the sound is NOT output from rear speakers when you receive monaural broadcasting sounds. • Surround control can be set for each source. Dolby Pro Logic II Music Adjustment 1 Display the Dolby Pro Logic II Music Adjust screen 2 Adjust the sound field [Dimension Control] Sets the surround position by adjusting the front and rear volume balance. [Center Width Control] Sets the vocal image position by adjusting the right and left vocal volume level. [Panorama Mode] Turns the Panorama mode On or Off. . • You cannot use the during playback of a Multi-channel source. DNX9140/DDX814/DDX8034BT Position 3 Position 3 You can adjust the sound effects according to your listening position. 1 2 Display the Position screen Touch [ ] > [] > [Position]. (page 61) Set the Position Control [P1] - [P3] Stores the present adjustment setup in memory, or calls it from memory. To store your adjustment in memory: Continue to touch [P1] to [P3] more than 2 seconds. To call your adjustment from memory: Touch [P1] to [P3] of your adjustment you wish to call from memory. [2], [3] Sets a listening position. You can select any of "Front R" (Right front), "Front L" (Left front), "Front All" (All front), and "All" (All) positions. [DTA] Displays the Position DTA (Digital Time Alignment) screen. Exit Position Control . • The final distance is adjusted to the total of Car Type Set Up value (page 82) and Position Setup (both Position and Position DTA) value. • If you change the Car Type Set Up value (page 82), the position is set to "All". • Only the adjusted distance of position setup (Position and Position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (page 82). Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 2 Select a speaker you wish to adjust 44 22 11 55 33 66 3 Center speaker Left front speaker Right front speaker Left rear speaker Right rear speaker Subwoofer 1 2 3 4 5 6 [2], [3] Finely adjusts t...
