Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
When to replace the battery With normal use, battery life (CR2025) should last for about 6 months. When the remote can no longer operate the unit, replace the battery with a new one. .side facing up Note . If you are not going to use the remote for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. Compatible iPod/ iPhone models The compatible iPod/iPhone models are as follows. Update the software of the iPod/iPhone to the latest version before using it with this unit. iPod touch (5th generation) iPod nano (7th generation)* iPhone 5 * The iPod nano (7th generation) cannot be controlled by the remote when the command of “MENU,” “.,” “.,” and “ENTER” is pressed. On copyrights iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. Note . This unit is not specified for use with an iPad, and malfunction may result if used with one. Operating an iPod 1 Set an iPod on the dock connector. The dock connector can be tilted slightly. For details, see “How to handle an iPod.” 2 Press .. When using batteries, press ./. on the unit, then press .. The iPod begins playback. You can operate the connected iPod via this unit or the iPod itself. Notes . If a pop-up message appears on the display of the iPod touch or iPhone, see “About App.” . If the battery of the iPod is extremely low, charge it for a while before operation. . Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using an iPod connected to this unit. . For details of environmental conditions for operating the iPod, check the website of Apple Inc. To remove the iPod For details, see “How to handle an iPod.” To adjust the volume Press VOLUME +/. (VOL +/. on the remote). Tip . The OPR/BATT indicator flashes three times when the sound is set to either maximum or minimum volume. To charge an iPod (AC only) You can use the unit as a battery charger for an iPod when the power is supplied by the AC adaptor. Charging begins when the iPod is connected to the unit. The charging status appears in the display on the iPod. For details, refer to the user’s guide of the iPod. Connecting optional components You can enjoy the sound from an optional component, such as a portable digital music player, through the speakers of this unit. Be sure to turn off the power of each component before making any connections. 1 Firmly connect the line output jack of a portable digital music player (or other component) to the AUDIO IN jack on the back of the unit, using a suitable audio connecting cable (not supplied). 2 Press ... to turn on the unit. 3 Turn the connected component on. 4 Play the connected component. The sound from the connected component is output from the speakers of this unit. Notes . The necessary type of audio connecting cable depends on the optional component. Make sure to use the correct type of cable. . If the volume level is low, adjust the volume of the unit first. If the volume is still too low, adjust the volume of the connected component. . When playing an optional component connected to the AUDIO IN jack, stop playback of an iPod. . Disconnect the audio connecting cable from the unit when it is not in use. About App A dedicated Dock App for iPod touch/iPhone available at Apple App Store. Search for “D-Sappli” and download the free App to find out more about the functions. Features . D-Sappli includes various timer functions: Alarm, Music Play Timer, and Sleep Timer. . You can set up to 10 alarms, using songs in iPod or Preset Sound in D-Sappli for the alarm sound. The Music Play Timer allows you to play/pause desired music at a desired time. The Sleep Timer allows you to specify a time at which to stop music playback. The Music Play Timer and Sleep Timer work in combination with the power supply of the unit. Music Play Timer, Sleep Timer and Alarm are available only when D-Sappli is activated. . D-Sappli also includes a clock display enlarge feature. Notes . If the App to link with this unit is not downloaded to your iPod touch/iPhone, a popup message prompting you to download D- Sappli may appear repeatedly. Deactivate the App’s link function to stop the pop-up message. . To deactivate the App’s link function: Connect the AC adaptor, and then press ./. to turn off the unit. Remove your iPod touch/iPhone from the dock connector. While holding down ., also press and hold ./. on the unit for at least 2 seconds. (The OPR/BATT indicator flashes twice w...