Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
PSM6P speakers provide exceptional sound quality in a rugged, compact package and are suitable for a wide variety of applications. Each PSM6P features an internal 50 watt power amplifier with gain, eq and level controls. 1/4” Input and Aux Out jacks allow for a variety of system configurations. (Some examples of their application are shown on page 6.) The moisture-resistant enclosures of the PSM6P are manufactured from a high-impact polymer to provide years of rugged use. They feature an integrated handle and a 5/8” stand mount for secure use with the Traveler PA speaker stands. The PSM6P speakers feature a high efficiency dome tweeter and a sturdy 6-1/2” low frequency driver for clear and faithful audio reproduction. IMPORTANT SAFETY INSTRUCTIONS: 1.Read, follow and keep these instructions. Heed all warnings. 2.This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3.This speaker is designed for use on a level floor or mounted to the supplied speaker stand. The use of a speaker stand may pose a risk of personal injury. Installations are to be performed by a professional installer in accordance with local building codes. 4.Speaker cables are a tripping hazard and must be routed out of traffic areas and away from any possible accidental contact. 5.Do not expose this speaker to rain or moisture. Do not place liquid filled containers on this speaker. Clean only with a damp cloth. 6.Repair or service of this speaker should be performed only by qualified personnel. PSM6P Powered Full Range Enclosures The Input Plate: 12 3 4 9 10 5 6 7 8 11 PSM6P Powered Full Range Enclosures 1. POWER LED: This LED illuminates when the unit is on. The blue LED on the front of the enclosure (not shown) also illuminates when the unit is on. 2. MIC/LINE: Use this switch to set the input for the type of source connected to the Input jack of the PSM6P. For microphones, set the switch to the Mic position (switch depressed). For line level signals, such as the output of a mixer, set the switch to the Line position (switch out). 3. GAIN: Use this control to adjust the level of the input signal when the Mic/Line switch (#2) is in the Mic position (switch depressed). 4. TONE: Use this control to adjust the equalization of input signal. Rotating this control counter clockwise boosts the low frequencies, rotating this control clockwise boosts the high frequencies. 5. VOLUME: Use this control to adjust the speaker’s output level. 6. INPUT: Use this jack to connect the signal source to the PSM6P - see Applications on page 6. 7. AUX OUT: Use this jack to connect the PSM6P to the Input jack of another PSM6P when using multiple cabinets - see Applications on page 6. The output of this jack is unaffected by the Gain, Tone, and Volume controls (#3, 4, 5). 8. VOLTAGE SELECTOR: Use this switch to match the PSM6P to the AC line voltage source. 9. FUSE: The PSM6P uses a fuse to help protect the unit from damage due to overload conditions. If the fuse fails replace it only with the same size and type as indicated on the panel. If the fuse fails repeatedly, check the AC line voltage source and the unit’s Voltage Selector switch (#8). If the problem persists contact your Crate dealer. 10. POWER: Use this switch to turn the PSM6P on and off. The Power LED (#1) and the front panel blue LED illuminate when the power is on. 11. AC LINE CORD: This grounded power cord is to be plugged into a grounded power outlet, wired to current electric codes and compatible with the voltage, power and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection. PSM6P Powered Full Range Enclosures Applications: SAMPLE STEREO CONFIGURATION: CSX42FX PSM6P PSM6P CSX42FX PSM6P INPUT AUX OUT INPUT AUX OUT INPUT AUX OUT INPUT AUX OUT PSM6P TO OPTIONAL ADDITIONAL PSM6P TO OPTIONAL ADDITIONAL PSM6P SAMPLE MONO CONFIGURATION: LEFT OUT RIGHT OUT MONO OUT TO OPTIONAL ADDITIONAL PSM6Ps PSM6P Powered Full Range Enclosures System Block Diagram: MIC/ LINE GAIN TONE VOLUME POWER AMP HIGH FREQ DRIVER INPUT AUX OUT LOW FREQ DRIVER XO PSM6P Powered Full Range Enclosures Technical Specifications: Cabinet Type Molded High-Impact Polymer Power Handling 50W (RMS), 80W peak Drivers Low Frequency 6.5” woofer High Frequency Dome tweeter Sensitivity 91dB (1W @ 1m) Rated Maximum SPL 112dB Frequency Response 80Hz - 20kHz Controls Gain, Tone, Volume; Mic/Line switch Input / Aux Out Connectors 1/4” Input jacks Power Requirements 120VAC, 60Hz, 70VA 100/115VAC, 50/60Hz, 70VA 230VAC, 50/60Hz, 70VA Dimensions H x W x D 14.17”H x 7.88”W x 9.12D” 36cm x 20cm x 23.2cm Weight 15.4 lbs 7 kg Stand Mount 5/8” Specifications subject to change without notice. ©2003 SLM Electronics, Inc. • A Division of St. Louis Music, Inc. 1400 Ferguson Avenue • St. Louis, MO 63133 47-861-01 • 101003 ...