Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
to . are completed. . Connect the speaker cords to the speakers and the unit. Insert the red-line end to the + terminal. . On the speakers. On the unit . Connect the AM loop antenna. . On the unit . Connect the FM wire antenna. . When using an external antenna. On the unitExternal antenna . Connect the DAB antenna (for the UK model only). DAB wire antenna . Connect the speaker cords to the speakers. Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted. . Connect the speaker cords to the unit. Make sure the connectors at the end of the speaker cords are correctly aligned with the projections in the SPEAKER terminals on the unit, and then insert the connectors into the terminals. Make sure that the speaker cords are firmly connected to the +/– terminals on the speakers and to the SPEAKER terminals on the unit. To ensure good reception, keep the antenna away from the unit or any other nearby metal or electrical devices (such as AV equipment). When using the unit in an area with poor reception, connect an external antenna with a commercially available 75 . coaxial cable. With a commercially available DAB external antenna, you can enjoy more robust DAB reception. It is recommended that you use the supplied DAB wire antenna in areas with strong reception only. 75 . coaxial cable with an F male type connector will be needed to install a DAB external antenna. Setup Guide “GIGA JUKE” Multi-room Package HDD Network Audio System NAS-SC500PK © 2009 Sony Corporation Printed in Malaysia 1 Checking the supplied accessories “GIGA JUKE” Music Server and its supplied accessories . “GIGA JUKE” Music Server NAS-S500HDE (1) . Wireless adaptor UWA-NA1 (1) . Wireless adaptor extension cable (1) . Speaker codes (2) Speaker cords can be replaced with other cords of your choice (see “How to detach the speaker cords from the speaker connectors”) . Speaker pads (8) or . AM loop antenna (1) . FM wire antenna (1) . DAB wire antenna (1) (for the UK model only) . Remote control (1) . R6 (size AA) batteries (2) . Oval attachments for “WALKMAN” (2) For details on the “WALKMAN” models that are compatible with each oval attachment for “WALKMAN” and on installing the oval attachment for “WALKMAN” onto the unit, refer to the Operating Instructions. Type A attachment Type B attachment The attachment type (A or B) is indicated on the bottom of the attachment. . CD-ROM containing the “Music Transfer” PC software (1) Do not play this disc on an audio CD player. “GIGA JUKE” Wireless Player and its supplied accessories . “GIGA JUKE” Wireless Player NAS-C5E (1) . Remote control (1) . R6 (size AA) batteries (2) . 12V AC power adaptor (1) . Power cord (1) The supplied power cord comes with an attached clamp filter. This power cord is designed for exclusive use with the NAS-C5E only. For models except the UK model For the UK model . “Internet Radio service on “GIGA JUKE” Wireless Player” leaflet (1) Wireless station and its supplied accessories . Wireless station WAP-NA1 (1) . Wireless station stand (1) . Network (LAN) cable (1) . 5V AC power adaptor (1) . Power cord (1) For models except the UK model For the UK model Other supplied accessories The following accessories are for common use with all the devices in the package . Operating Instructions (1) This manual provides full explanations of the various settings, operations and the network connection procedure. This manual also contains precautions for the safe use of the unit. . Setup Guide (this manual) Before setting up the units Do the following operations before setting up the units. Insert batteries into the remote control . Slide and remove the battery compartment lid. . Insert two R6 (size AA) batteries (. end first) matching the polarities. When the remote control is no longer able to operate the unit, replace both batteries with new ones. For “GIGA JUKE” Music ServerFor “GIGA JUKE” Wireless Player Prepare the Wireless Station . Attach the stand (supplied) to the wireless station. The operation mode switch is factory set to “AUTO”. Operation mode switch Tip How to detach the speaker cords from the speaker connectors If you want to use a different set of speaker cords, you can remove the cords from the speaker connectors. . You can use any commercially available speaker cords of gauge AWG #18 - AWG #24. . Before attaching a new speaker cord, strip off 10 mm of its insulation and twist the bare wires. Push the tab on the speaker connector in the direction of the arrow and pull out the speaker cord. 3 Connecting the supplied devices over a wireless network (Instant (S-IWS) connection) Connecting the devices supplied in this package over a wireless network through Instant (S-IWS)*1 connection allows you to listen audio data stored on the “GIGA JUKE” Music Server through the speakers of the “GIGA JUKE” Wireless Player in a different room. *1 Instant (S-IWS) (Sony Instant Wireless Audio Setup) is a function that automatically sets up a wireless network and con...