Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Modification of the product could result in hazardous radiation of EMC or other unsafe operation. 3 EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Introduction With this docking speaker, you can enjoy audio from the iPod/iPhone, and other external audio devices. What's in the box Check and identify the contents of your package: • Main unit • AC power adaptor • Quick star t guide • Safety sheet EN 4 Overview of the main unit a bced a Dock for the iPod/iPhone b -/+ • Adjust volume. c MP3-LINK • Connect an external audio device. d DC IN • Connect power. e • Pause or resume play. 5 EN 3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Note • The type plate is located at the back of the docking speaker. Connect the power adaptor to: • the DC IN socket at the back of the speaker. • the wall outlet. DC IN 4 Play Play from iPod/iPhone You can enjoy audio from your iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker suppor ts the following iPod and iPhone models: Made for. • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod classic • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Listen to the iPod/iPhone 1 Place an iPod/iPhone in the dock. 2 Play audio on the iPod/iPhone. » Audio streams from the iPod/iPhone to the docking speaker. • To pause or resume play, press . To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock. EN 6 Charge the iPod/iPhone When the docking speaker is connected to power, the docked iPod/iPhone begins to charge automatically. Play from an external audio device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. Note • Make sure that no iPod/iPhone is docked in the speaker. 1 Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket at the back of the docking speaker. • the headphone socket on an external device. » The docking speaker switches to MP3 link mode automatically. 2 Play audio on the device (see the device's user manual). Adjust volume During play, press -/+ to adjust volume. 5 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Total Output Power Signal to Noise Ratio > 62 dBA 10 W per channel x 2 MP3 Link 650 mV RMS General information AC Power Model: AS190-100 AE180 (Philips); Input: 100-240 V ~, 50/60Hz, 0.7A; Operation Power Consumption 15 W Output: 10 V 1.8 A Standby Power Consumption Max. load for iPod/ iPhone 5 V 1 A <0.5 W Dimensions - Main Unit (WxHxD)275 x 117 x 121 mm Weight - Main Unit 1.2 kg 7 EN 6 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (t). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. No sound • Adjust the volume. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. 7 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. “Made for iPod” and “Made for iPhone” mean that an electronic accessor y has been designed to connect specifically to iPod or iPhone respectively, and has been cer tified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulator y standards. Please note that the use of this accessor y with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means ...