Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
For optimum performance and safety, please read these instructions carefully. Accessories ROTJ0079 Connections Connection of speaker cables Notes: • Before connections, switch OFF the power to the amplifier. • Use with an amplifier having 8 ohms impedance for the centre speaker and 0 ohms impedance for the rear speakers. • Be sure to connect only positive (+) wires to positive (+) terminals, and negative (—) wires to negative (—) terminals. SPEAKERS 8« REAR R L Ö® O; CENTRE]?!? Stereo amplifier (not included) Long (Ï) 15mm (19/32*) k1 S' < (D For SB-C938, SB-S948 Twist. Note: To prevent damage to circuitry, never short circuit positive (+) and negative (—) speaker wires Surround speakers (SB-S948) Centre channel speaker (SB-C938) Speaker impedance and allowed input Impedance Allowed input Centre channel speaker 8ÎÎ 110 W (DIN) Surround speakers, 80 100 W (DIN) Notes 1. Be sure to reduce the volume level setting when the signal input exceeds the rated allowable input in order to avoid damage to circuitry or other malfunctions. 2. Avoid locations such as described below: • tn direct sunlight. • Near heating appliances or other sources of heat. • Where the humidity is high. 3. Never use alcohol, paint thinner, benzine or similar chemicals to clean the unit as they may damage the finish. 4. Do not touch the diaphragms, to do so may cause distortion. Caution The only amplifiers you should connect to your speakers are those whose output in Dolby Pro Logic does not exceed the above figures. Using anamplifier stronger than that indicated above, you risk blowing either the amp or your speakers, moreover the possibility of fire. If equipment is damaged in any way or unexpected trouble occurs during playback, unplug the system from its outlet and call a service-man for help. Positioning The diagram below shows the basic positioning of each speaker of this system. Centre channel speaker SB-C938 Set either on top of or underneath the TV. (See overleaf for the installation procedure.) Note: 1. The centre channel speaker is made so as to be able to be used in close proximity to the TV but irregular colouring may result due to how the system is placed. If such a distortion occurs, turn off the TV for 15 to 30 minutes. The demagnetizing function of the TV will eliminate the distortion. If the irregular colouring is still visible, then move the speaker further away from the TV. Please note that if there is a magnetic object near the TV, irregular colouring may result due to the interaction between the TV and the speaker. Surround speaker (SB-S948) Attach the speaker to the wall at a position which is at ear level and slightly behind the listening point. (See overleaf for the installation procedure.) If the speaker cannot be attached to the wall, it can alternatively be placed on top of a shelf or on the floor. Wall installation Technical Note: 1. The wall is required to be strong enough to hold a weight of 1.6 kg ( for SB-S948.) 2. The methods of installation for each speaker are the same. How to install the metal wall mounts Metal wall mount (included)— Screws (included) How to install the speakers on the wall Wall Screw (not included) Screw the wood screw into a thick and hard part of the wall Consult your Technics dealer for details Wall or pillar 30 - 35mm specifications Centre channel speaker SB-C938 Type 1 - way 2 speaker system bass-reflex Speakers Full range: 8 cm (3-5/32’) cone type Impedance 8 ohms Input Power 220 W, Music 110 W, (DIN) Output Sound Pressure Level Frequency Range Dimensions (W x H x D) Weight (approx.) 87 dB/W (1,0 m) 130 Hz-20 KHz (-16 dB) 170 Hz - 18 KHz (-10 dB) 320 x 130 x 100 mm 12-5/8“ x 5-1/8* x 3-15/16" 1.7 kg (3.81b) Surround speaker SB-S948 Type 1- way 2 speaker system bass-reflex Speaker Full range: 8 cm (3-5/32*) cone type Impedance 8 ohms Input Power 200 W, Music 100 W, DIN Output Sound Pressure Level 86 dB/W (1.0 m) Frequency Range Dimensions (W x H x D) Weight (approx.) 135 Hz-20 KHz (-16 dB) 165 Hz-18 KHz (-10dB) 170 x 240 x 100 mm (6-11/16* x 9-7/16* x 3-15/16*) 1.6 kg (3.53 lb) Note: Specifications are subject to change without notice. Weight and dimensions are approximate. Panasonic Con*umar Electronic« Panasonic Sale» Company, Panaaonlc Canada Inc. Company, Division of Matauahtta Division of Matsushita Electric of 5770 Ambler Drive, Electric Corporation of America Puerto Rico. Inc. ("PSC") Mississauga, Ontario One Panasonic Way, S&caucus, Ave. 65 do Infanterfa. Km.9.5 L4W 2T3 New Jersey 07094 San Gabriel Industrial Park, http J/Carolina, Puerto Rico 00985 RQTJ0079 Nous vous remercions d’avoir arrêté votre choix sur ces enceintes acoustiques Technics. Pour votre sécurité, et afin d’en tirer un rendement optimal, il est recommandé de lire attentivement le présent manuel. Accessoires Supports métalliques pour montage mura! (2) Vis (4) fffP Câbl...