Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the rear of the apparatus.Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. • Before connecting the AC adaptor, ensure you have completed all other connections. Note • The type plate is located on the rear of the main unit. Prepare the AC power adaptor. Connect one end of the AC adaptor to the DC IN socket on the main unit. 14 EN 3 Connect the other end of the AC adaptor to the wall outlet. Set time and date 1 In standby mode, press and hold SET TIME/PROG for 2 seconds. » [12 HR] begins to blink. 2 Press / to select 12/24 hour format. 3 Press SET TIME/PROG to confirm. » The hour digits begin to blink. 4 Press / to set the hour. 5 Press SET TIME/PROG to confirm. » The minute digits begin to blink. 6 Repeat steps 4-5 to set the minute, year, month, and day. Tip • In 12 hour format, [MONTH--DAY] is displayed. • in 24 hour format, [DAY--MONTH] is displayed. English EN 15 Turn on Press POWER. » The unit switches to the last selected source. Switch to standby 1 Press POWER again to switch the unit to standby mode. » The time and date (if set) appear on the display panel. 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this unit. Compatible iPod/iPhone Apple iPod and iPhone models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. • iPhone, iPhone 3G. Listen to the iPod/iPhone 1 Place the iPod/iPhone into the dock. 16 EN Press SOURCE repeatedly to select iPod/iPhone source. » The connected iPod/iPhone plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. • To go back to previous iPod/iPhone menu, press MENU. To scroll through the menu, press PRESET +/-. To confirm a selection, press OK/ . » If no key is pressed for more than 10 seconds, OK/ acts back as the play/pause key. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge. Tip • For certain iPod models, it may take up to a minute before the charging indication appears. Play from an external device You can also listen to an external audio device through this unit. 1 Press SOURCE repeatedly to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack (3.5mm) on the back of the unit. • the headphone jack on an external device. 3 Start to play the device (see the device user manual). English EN 17 5 Listen to radio Note • Only FM radio reception is available on this unit. Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. Note • For optimal reception, fully extend and adjust the position of the antenna. 1 Press TUNER to select FM tuner. 2 Press and hold on the remote control for more than 2 seconds. » [Srch] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press repeatedly until you find optimal reception. / / Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold SET TIME/PROG for more than 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. 18 EN Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press SET TIME/PROG to activate the program mode. 3 Press PRESET +/- to select a number. 4 Press SET TIME/PROG to confirm. 5 Repeat the above steps to program other stations. Tip • To overwrite a programmed station, store another station in its place. Select a preset radio station 1 Press PRESET +/- to select a preset number. 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold ALM 1 or ALM 2 for 2 seconds. » [AL 1] or [AL 2] begin to blink. 3 Press SOURCE to select an alarm sound source: iPod/iPhone, iPod/ iPhone playlist, FM tuner, or buzzer. 4 Press ALM 1 or ALM 2. » Hour digits begin to blink. 5 Press repeatedly to set the hour. 6 Press ALM 1 or ALM 2 to confirm. » Minute digits begin to blink. 7 Repeat steps 5-6 to set the minute. 8 Repeat steps 5-6 to select whether to ring alarm the whole week, on weekdays, or at weekend. / English EN 19 9 Repeat ste...
Эта инструкция также подходит к моделям:Акустика - DC320/37 (642.57 kb)