Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
110 - 125 VAC, 50/60 Hz Export Model 208 - 240 VAC, 50/60 Hz (90W max) Dimensions (HWD) 5.25 x 8.4 x 9” / 13 x 21 x 23 cm Weight 9.5 lbs / 3.3 Kg Tone Controls Bass +8/-12 dB @ 100 Hz Treble +10/-12 dB @ 10 kHz Inputs Balanced female XLR, switchable phantom power, 15 volts DC @ 6.8 k ohm Mic-Level Setting Lo-Z Line-Level Setting Bridging (10 k ohm) Line Hi-Z, unbalanced, 1/4”-phone & RCA Outputs Line (post fader) Lo-Z, buffered, RCA Speaker 8 ohm, unswitched, 1/4”-phone Sensitivity For Rated Output Line balanced -18 dBv (125 mVrms) Microphone balanced -56 dBv (1.5 mVrms) Line -18 dBv (125 mVrms) (Specifications subject to change without CONTENTS GETTING STARTED ............................................................................................................... .................................. 2 FEEDBACK ...................................................................................................................... ......................................... 3 BASIC SYSTEM OPERATION ........................................................................................................ ............................ 4 BALANCED INPUT JACK ........................................................................................................... ............................... 4 AN-1000X ACCESSORIES ......................................................................................................... ............................... 6 IMPORTANT SAFEGUARDS .......................................................................................................... ........................... 7 HAVING TROUBLE W/ YOUR SOUND SYSTEM? .......................................................................................... ............ 8 AN-1000X TECHNICAL ............................................................................................. ................... 8 HAVING TROUBLE W/ YOUR SOUND SYSTEM? CONDITION POSSIBLE CAUSE No Sound (Power LED Not Lit) • turn POWER switch on • plug in power cord • check for blown fuse No Sound (Power LED Lights) • check for output from source • make sure all cables are completely plugged in • increase volume control Distorted Sound • check input cable connection • lower input signal level Excessive Hum / Noise • use shielded input cable Mic Volume Too Low • set balanced input to mic-level Blows Fuse w/ Auxiliary Speaker • shorted speaker cable Anchor OWNER’S MANUAL AN-1000X Portable Sound System Anchor Audio Customer Service 888-444-6077 Rated Power Output 50 watt continuous/90 watt dynamic Max SPL @ Rated Power 103 dB @ 1 meter Frequency Response 65 Hz – 20 kHz ±3dB Speaker Type 4.5” woofer w/ shielded magnet, 10mm dome tweeter, ferro-fluid cooled AC Power Reqs. 110 - 125 VAC, 50/60 Hz Export Model 208 - 240 VAC, 50/60 Hz (90W max) Dimensions (HWD) 5.25 x 8.4 x 9” / 13 x 21 x 23 cm Weight 9.5 lbs / 3.3 Kg Tone Controls Bass +8/-12 dB @ 100 Hz Treble +10/-12 dB @ 10 kHz Inputs Balanced female XLR, switchable phantom power, 15 volts DC @ 6.8 k ohm Mic-Level Setting Lo-Z Line-Level Setting Bridging (10 k ohm) Line Hi-Z, unbalanced, 1/4”-phone & RCA Outputs Line (post fader) Lo-Z, buffered, RCA Speaker 8 ohm, unswitched, 1/4”-phone Sensitivity For Rated Output Line balanced -18 dBv (125 mVrms) Microphone balanced -56 dBv (1.5 mVrms) Line -18 dBv (125 mVrms) (Specifications subject to change without CONTENTS GETTING STARTED ............................................................................................................... .................................. 2 FEEDBACK ...................................................................................................................... ......................................... 3 BASIC SYSTEM OPERATION ........................................................................................................ ............................ 4 BALANCED INPUT JACK ........................................................................................................... ............................... 4 AN-1000X ACCESSORIES ......................................................................................................... ............................... 6 IMPORTANT SAFEGUARDS .......................................................................................................... ........................... 7 HAVING TROUBLE W/ YOUR SOUND SYSTEM? .......................................................................................... ............ 8 AN-1000X TECHNICAL ............................................................................................. ................... 8 HAVING TROUBLE W/ YOUR SOUND SYSTEM? CONDITION POSSIBLE CAUSE No Sound (Power LED Not Lit) • turn POWER switch on • plug in power cord • check for blown fuse No Sound (Power LED Lights) • check for output from source • make sure all cables are completely plugged in • increase volume control Distorted Sound • ch...