Low sulfur fuels reduce particulate and oxides of nitrogen emissions as well. The Oilheat Manufacturers' Association recommends these fuels as the preferred fuels for this burner. • State and local approvals are shown on burner rating label (see below). • All oil burners should be installed in accordance with regulations of the latest revision of the National Fire Protection Association Standard NFPA 31 and in complete accordance with all local codes and authorities having jurisdiction. Regulati

Beckett Corporation • P.O. Box 1289, Elyria, Ohio 44036-1289 • 1-800-645-2876 • Fax: 888-327-4811 R.W. Beckett Canada, Ltd. • 430 Laird Road, Unit 3, Guelph, Ontario N1G 3X7 • 1-800-665-6972 • Fax: (519)763-5656 Form No. 6808 R06, Printed in the USA 05/10

• All covers or service access plates must be in place at all times except during maintenance and service. • This applies to all controls, panels, enclosures, switches, and guards or any component with a cover as part of its design. Incorrect Wiring Will Result in Improper Control Operation Fire or Explosion Hazard Can cause severe injury, death, or property damage. • The control can malfunction if it gets wet, leading to accumulation of explosive vapors. • Never install where water can flood, d

What to do if you smell gas: - Do not try to light any appliance. - Do not touch any electrical switch. - Do not use any phone in your building. - Immediately call your gas supplier from a telephone outside the building. - Follow the gas supplier’s instructions. - Call the fire department if you cannot contact your supplier. Installation and service must be performed by a qualified installer, service agency, or the gas supplier. 1. 2. 3. COMMERCIAL PRODUCTS Fire, Explosion and Asphyxiation Hazar

Combination Rate Nozzle Setting Shutter Band Press. Press. Flange Inserti°n 214A AFG B2007 AFG50MLSS 1.20 1.00x60B 1 10 1 N/A 150 51311 4.50" 215A AFG B2007 AFG50MLSS 1.55 1.25x45B 2 10 3 N/A 150 51311 4.50" 216A CF375 BCF3907 CF56KY 1.90 1.35x45ES 1 7-1/2 0 N/A 200 51311 4.50" 217A CF500 BCF809 CF60KK 2.25 1.75x45B 2 4 0 N/A 150 51311 3.75" 218A CF500 BCF809 CF60KK 2.50 2.00x45B (D) 2 5 0 N/A 150 51311 3.75" Shutter and band settings refer to the AFG, CF375, CF500 and CF800 only. DeDietr

Four-Burner 36”W. Six-Burner 36”W. Four-Burner/ 36”W. Four-Burner/ Range Range Griddle Range Grill Range *Shown throughout with 6”H. backguard. See Installation Notes & Accessories for details. ORDERING INSTRUCTIONS First specify model number, and then color code (VGSC307-4BSS). If ordering optional brass trim, specify code at end (VGSC307-4BSSBR). If ordering optional LP conversion, specify code at end (VGSC307-4BSSBRLP). COOKING Professional Freestanding Gas Self-Clean 30”/36”W. Sealed Burner

ship wt. lbs. (kg) 104 (47.2) 160 (72.6) 115 (52.2) 125 (56.7) PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1 - 8 8 8 - VI KI N G 1 RELEASED 1 2/1/07 ©2007 VRC — INFORMATION SUBJECT TO CHANGE PROFE SSIONAL Multi-Use & Refrigeration Base l-H c Dimensions & Specifications DOOR SWING PLANNING AND DESIGN GUIDE VIKINGRANGE.COM • 1 -888-VIKING1 RELEASED 1 2/1/07 ©2007 VRC — INFORMATION SUBJECT TO CHANGE ^ PROFE S 8IONAL OUTDOOR—STORAGE Multi-Use & Refrigeration Base № O Installation Not

TruSear™ Griller VURO2400*** Base for 15"W. refrigeration products VURO3200**** Base for 24"W. refrigeration products FINISH DETAILS FOR ALL MODELS Stainless Steel (SS) *Shown throughout with VGSB152T (15"W. side burners), sold separately **Shown throughout with VGWT241T (24"W. wok top), sold separately ***Shown throughout with VUAR150T (15"W. beverage center), sold separately ****Shown throughout with VUAR140T (24"W. beverage center), sold separately For compatible cooking and refrigerati

• Do not tamper with the burner or controls or make any adjustments unless you are a trained and qualified service technician. • To ensure continued reliable operation, a qualified service technician must service this burner annually. • More frequent service intervals may be required in dusty or adverse environments. • Operation and adjustment of the burner requires technical training and skillful use of combustion test instruments and other test equipment. The following guidelines are provided