Оценок - , средний балл: ( )

Инструкция по эксплуатации Philips, модель HX6731/02

Производитель: Philips
Размер: 631.07 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Note:When Sonicare is used in clinical studies, the default 2-minute Clean mode must be selected. However, in whitening/stain reduction studies, the Clean and White mode must be selected.The handle should be fully charged and the Easy-start feature deactivated. Features Easy-start® This Sonicare model comes with the Easy-star t® feature activated. The Easy-star t feature gently increases power over the fi rst 14 brushings to ease into the Sonicare experience. Note: Each of the first 14 brushings must be at least 1 minute in length to move through the Easy-start ramp-up cycle properly. Note:When the Clean and White mode is selected, the Easy-start feature is inactive. , -- ENGLISH8 Clean and White mode brushing instructions The Clean and White mode combines 2 minutes of Clean mode for a whole mouth clean, with an additional 30 seconds of White mode to focus on the visible front teeth. 1 Brush the first 2 minutes as instructed in steps 1-6 above. 2 After the 2 minutes of Clean mode, the White mode begins with a change in brushing sound and motion.That is your signal to start brushing the upper front teeth for 15 seconds 3 At the next beep and pause, move to the bottom front teeth for the final 15 seconds of brushing. Brushing modes Sonicare automatically star ts in the default Clean mode.To select a different brushing mode: 1 Press the on/off button to toggle between modes. The green LED indicates the selected mode. Note:You can only switch between modes when the toothbrush is turned on. Clean mode Standard mode for superior teeth cleaning. Sensitive mode (select models) Gentle, yet thorough cleaning for sensitive gums and teeth. Clean and White mode 2 minutes of Clean mode, with an additional 30 seconds of White mode to focus on your visible front teeth. Note:When Sonicare is used in clinical studies, the default 2-minute Clean mode must be selected. However, in whitening/stain reduction studies, the Clean and White mode must be selected.The handle should be fully charged and the Easy-start feature deactivated. Features Easy-start® This Sonicare model comes with the Easy-star t® feature activated. The Easy-star t feature gently increases power over the fi rst 14 brushings to ease into the Sonicare experience. Note: Each of the first 14 brushings must be at least 1 minute in length to move through the Easy-start ramp-up cycle properly. Note:When the Clean and White mode is selected, the Easy-start feature is inactive. , -- ENGLISH8 ENGLISH 1243 Deactivating or activating the Easy-start feature 1 Attach your brush head to the handle. 2 Place the handle in the plugged-in charger. -To deactivate Easy-star t: Press and hold the power on/off button for 2 seconds.You hear 1 beep to indicate that the Easy-star t feature has been deactivated. -To activate Easy-star t: Press and hold the power on/off button for 5 seconds.You hear 2 beeps to indicate that the Easy-star t feature has been activated. Note: Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare’s effectiveness in removing plaque. Smartimer® The Smar timer® indicates that your brushing cycle is complete by automatically turning off the toothbrush at the end of the brushing cycle. Dental professionals recommend brushing no less than 2 minutes twice a day. If you want to pause or stop brushing during your 2-minute cycle, press and hold the power on/off button for 2 seconds. Press the power on/off button again and the Smar timer picks up where you left off. The Smar timer automatically resets to the beginning of a 2-minute cycle if: -brushing is paused for 30 seconds or longer. -the handle is returned to the charger. Quadpacer® (select models) -The Quadpacer® is an inter val timer that has a shor t beep and pause to remind you to brush the 4 sections of your mouth evenly and thoroughly. -When you use the two-minute Clean or Sensitive mode, you hear a shor t beep and a pause in brushing action at 30, 60 and 90 second inter vals. -When you use the Clean and White mode, you hear and feel a change in the brush head sound and motion after 2 minutes of Clean mode. Then move the brush head to the visible top front teeth and brush them for 15 seconds. At the final beep and pause, move to the visible bottom teeth and brush them for 15 seconds. 10 ENGLISH Cord wrap on deluxe charger (select models) If your model includes the deluxe charger cover and base, the travel charger is pre-installed inside the cover. If you want to shor ten the power cord, you can store excess cord in the cord wrap feature built into the charger base. 1 To separate the charger cover from the charger base, press the two gray snap bars on the charger base and pull the white charger cover upwards. 2 Wrap excess power cord around the gray charger base as shown in the picture. Be sure to wrap the cord on the inside of the two snap levers. 3 When you have stored the excess cord, guide the power cord through the small groove in the rear of the gray charg...