Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
B Thumbnails Shows a thumbnail of the clip for which you are viewing property information. C PRE button The property of the one chip before the one in cursor will be displayed. D NEXT button The property of the one chip after the one in cursor will be displayed. E EDIT button When this button is pressed, the Meta Data Edit screen (with the items shown on the right) is displayed, and the Meta Data can be changed. F CLOSE button Close the property screen and go back to the thumbnail screen. The cursor moves to the thumbnail displayed last on the property display screen. Editing Meta Data When any of the items to be edited on the Meta Data Edit screen is clicked, the letters of the EDIT button turn black only for those items which can be changed. A BCDA EDIT button (page 29) The soft keyboard is displayed. For details on the soft keyboard, refer to page 29. Meta Data of clips created using the Edit Clip function of other P2 devices cannot be edited. B OK button After overwriting the Meta Data with the currently displayed Meta Data, the Property screen is restored. C CANCEL button The Meta Data remains unchanged, and the Property screen is restored. D APPLY button The Meta Data is overwritten with the currently displayed Meta Data. Checking the clips in P2 card/HDD (continued) Select listed devices (device selection buttons) soft keyboard G HA B C E D F A MODE The names of the modes corresponding to the items are displayed here. • Alphanumeric characters can be inputted when [Character String Mode] is displayed. • Only numbers can be inputted when [Number Mode] is displayed. B Input column Inputted alphanumeric characters are displayed. C ESC button This restores the original Meta Data screen. D CAPS LOCK button This switches the letters between the upper case and lower case. E BACKSPACE button This deletes the character in front of the character where the cursor is located. F ENTER button This enters the currently displayed data. G < button This moves the cursor in the input field toward the left. H > button This moves the cursor in the input field toward the right. Input instructions are as follows. 1. To enter letters, press keys on the on-screen keyboard. 2. To confirm input, press the ENTER button. When the Device Selection Button is pressed on the EXPLORE screen, the devices to be displayed on the thumbnail screen are selected. A B C D E F A ALL SLOTS button This displays all the slots. B ALL HDDS button This displays all the HDD. This display will not appear when in RAID mode. C HDD1 button / HDD2 button / RAID1 button HDD will be selected for each when in HDD mode. This button will be displayed as [RAID1] when in RAID mode. D SLOT1 button ~ SLOT5 button These are used to select and display the slots. E OK button Thumbnails are displayed in the case of P2 cards. Folders are displayed in the case of the HDDs. F CANCEL button Close this screen and return to the EXPLORE screen. Select devices as follows. . P2 cards Select the P2 card slot you require (either the ALL SLOTS or individual SLOT (1-5) buttons), and then press the OK button. . HDDs Select the HDD you require (from among the ALL HDDS, HDD1 or HDD2, or RAID1 button), and then press the OK button. Checking the clips in P2 card/HDD (continued) Selecting clips to display (FILTER) When the FILTER button is pressed on the EXPLORE screen, the combinations to be displayed on the thumbnail screen can be selected. F ABDEA ALL CLIPS button All the clips of the displayed devices are displayed. B SAME FORMAT button This displays only those clips recorded in the same format as the clip (yellow framed) where the cursor is positioned. C SELECTED CLIPS button This displays only the clip (blue framed) which is in the selected status. D Marked Clips This displays only the clips provided with shot marks. E Unmarked Clips This displays only the clips not provided with shot marks. F Meta Data items Only the clips corresponding to the keyword which was input in the selected item are displayed. G OK button Filter by selected or preset conditions. H CANCEL button Close FILTER selection screen without performing filtering process. When any of the Meta Data item buttons is pressed, the “keyword input” screen is displayed. G H Input field After entering the keyword, press the APPLY button and the OK button to proceed with filtering. If there are no clips which match the keyword concerned, a message indicating that no such clips exist is displayed. If clips matching the keyword exist, only the thumbnails of those clips are displayed. Multiple keywords can be selected at once. Press the CANCEL button to close the “keyword input” screen and return to the previous screen. Meta Data items The following filtering processes may be performed for Meta Data items: . Reporter button Filter by reporter. . Purpose button Filter by coverage target. . Object button Filter clips by content. . ProgramName button Filter by program name. . SceneNo. button Filter by scene number. . UserClipName...