Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Зарядные устройства - Battery Charger UC-200 (329.58 kb)
Зарядные устройства - Battery Charger UC-200 (174.6 kb)
Зарядные устройства - Battery Charger UC-200 (28.74 kb)
Фрагмент инструкции
Features • Automatic polarity detection • Top-off charging for a full charge • LED indicator displays charging mode • Timer protection • Overcharge protection • Abnormal battery detection indicates faulty battery and halts charging Operating Instructions 1. Snap the charging plate into the charger base. 2. Rotate the plug out of the AC adapter (U.S.), OR insert a plug appropriate for your region. OR 3. Connect the AC adapter to the bottom of the charger base, then plug into a wall outlet. 4. Pull down and hold the battery support, then insert the battery so it rests against the stop at the right side of the charging plate. The 2 pins on the charging plate must touch the 2 outer contacts on the battery. NOTE: The charger automatically determines the correct polarity (+/–). 5. Gently release the battery support to hold the battery securely in place during charging. LED Indicators Approximate charging times for fully discharged batteries: KLIC-5000 170 min. KLIC-5001 260 min. KLIC-7000, KLIC-7001 90 min. KLIC-7002 75 min. Using the Car Adapter Plug Connect the car adapter plug to the bottom of the charger base, then plug the other end into your car’s 12V socket. NOTE: Unplug the charger from the 12V socket when the car is not running, as the charger may draw current and drain the car battery. Troubleshooting • No indicator lights Confirm that the AC adapter or car adapter plug is firmly connected to the charger and either the wall outlet or 12V socket. If using the car adapter plug, confirm whether the ignition needs to be on. • Power light only Battery is already fully charged. Battery is inserted incorrectly. Remove and insert battery correctly. Dirt on contacts. Clean battery and charger contacts. • Power and Charge Status indicators both blink Battery is defective. Replace battery. • Hissing noise in charge mode Normal operation due to advanced switching circuitry. Technical Specifications Input voltage: 100–240 VAC Frequency: 50/60 Hz Power consumption: 14 W Output voltage: DC 12V Charging current: 600 mA CAUTION: • Charge only compatible Li-Ion rechargeable batteries. Other types of batteries may burst causing personal injury and damage. • Risk of electric shock. Use only in dry locations. • Do not operate charger if it has been damaged. • To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. • Be sure to use charger with correct voltage: AC 100-240V. • Do not insert any objects (such as a screwdriver or metal wires) into the charger. • Do not modify or disassemble. • If something appears wrong with the charger and/or batteries, disconnect from the electric outlet immediately. • Keep out of reach of infants. Children may use only under strict parental supervision. • Store in a dry, cool place. Recommended temperature ranges for use: Ni-MH To use (discharge) the batteries 32°–122° F (0°–50° C) To charge the batteries 32°–95° F (0°–35° C) To store the batteries -4°–86° F (-20°–30° C) Regu...
Эта инструкция также подходит к моделям:Зарядные устройства - Li-Ion K3000 (3.2 mb)
Зарядные устройства - Li-Ion Universal K7600 (3.2 mb)
Зарядные устройства - Li-Ion Rapid K5000 (3.2 mb)
Зарядные устройства - Li-Ion Universal K7500 (3.2 mb)