Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Please read the entire user manual prior to use. Fill out and mail the enclosed Warranty Registration Card, or register this purchase online at APC’s Universal Notebook Battery is a slim and lightweight external battery pack which provides up to 8- hours of continuous runtime ( actual runtimes may vary by notebook model and power setting) . Features • Ultra- lightweight construction reduces bulk and weight in notebook carry- on luggage. • Wide range of selectable output voltages power most notebook computers. • Four charge/discharge level indicators. • Letter-coded power tips provided compatibility with most notebook computers (see Compatibility Guide) . • Compatible with APC’s TravelPower Adapter and Universal Power Adapter models. • 80 Watts of continuous power, up to 100 Watts peak power output. • Up to 8 hours of continuous runtime for your notebook. Inspection Check the package contents for the following items: • APC Universal Notebook Battery ( UPB80) • Input/ Output UPB80 Power Cable • Conversion Plug and Jack Package • Compatibility Guide • User’s Manual • Warranty Card • Voltage and Tip Label • Rubber “Feet” ( 4) If any item listed above is not in the package, contact APC Customer Service. Safety Precautions Please read the following warnings carefully before using the UPB80 Universal Notebook Battery. Use the product correctly and according to the procedures described in this manual. WARNINGS • Do not attempt to disassemble or alter any part of this product. • Do not store beyond -4 to 140° F ( -20 to 60°C) and operate beyond 32 to 104° F ( 0 to 40° C) environment, as this will reduce product life or damage the product. • Do not allow this product to have contact with water or other liquids. If water or other liquids enter the battery interior, immediately unplug the product from the notebook. Continued use of the product may result in fire or an electrical shock. • Do not place this product near a heat source or expose the battery to direct flame or heat, as the battery may explode. Prior to Use Before using the UPB80 it should be fully charged. Please follow the instructions below on how to use and maintain the UPB80. 1 Finding the Notebook Voltage Setting Before using this battery, determine the DC input voltage requirement for the notebook being used. Notebook voltage ratings are usually indicated in one of two locations: at the back of the notebook on the system label or on the notebook AC-to-DC power adapter label. If the voltage cannot be located, refer to the “ Compatibility Guide” to determine the required setting for the notebook being used. 2 Output Voltage Setting Please refer to Figure 1 to become familiar with all aspects of the UPB80. To set the voltage output for the UPB80, proceed as follows: 1. Locate the input voltage requirement for your notebook computer. (Refer to “ Finding the Notebook Voltage Setting” for instructions). 2. Remove the yellow sticker on the UPB80 which covers the Output Voltage Selector Switch. 3. Ensure the UPB80 Power Cable is disconnected from the UPB80. 4. Turn the Output Voltage Selector Switch to the required voltage setting for the notebook being used. 5. Connect the UPB80 Power Cable to the UPB80 to make the change effective. NOTE: Accidentally switching the Output Voltage Selector Switch while discharging (using the UPB80) will automatically restrict power output.. The power output will only be resumed by disconnecting and then connecting the UPB80 Power Cable from/ to the UPB80. 3 Charging and Connecting the UPB80 Prior to use, completely charge the UPB80. Follow the instructions for setting the output voltage on the UPB80. Provided with the UPB80 is a plastic bag with an assortment of plug and jack tips. Plug and jack tips are each marked with a letter designator which corresponds to notebook models listed in the “ Compatibility Guide” and “ Compatibility” section of this manual. Plug tips are used to connect the output power of the UPB80 to the input DC voltage port on the notebook. Jack tips are used to connect the UPB80 to a power source ( notebook’s AC/DC Power Adapter, or APC’s TravelPower or Universal Power Adapters - purchased separately). Charging Connecting the UPB80 - con’t: Tips are marked with an uppercase letter (A, B, C, etc. ). Jacks are marked with a lowercase letter (a, b, c, etc. ). Example: An IBM ® X31 uses plug tip “B” and jack tip “b”. An Acer Travel Mate ® uses plug tip “K” and jack tip “k”, etc. The letter designators correspond to notebook models listed in the “ Compatibility Guide” and “ Compatibility” section of this manual. To make connections, refer to Figures 1 and 2, then proceed as follows: 1. Attach the appropriate Jack tip to the UPB80 Input Power Connector. 2. Attach the Plug tip to the UPB80 Output Power Connector. 3. Attach the notebook power adapter, APC TravelPower Adapter, or Universal Power Adapter to the UPB80 Jack tip. 4. The UPB80 Power Level Indicators should illuminate. If they do not, ensu...