Оценок - 2, средний балл: 5 ( )

Производитель: Lenmar Enterprises Размер: 119.48 kb Название файла: 12628_58-14-1801d2.pdf Язык инструкции:

11. DO NOT BURN OR INCINERATE BATTERY PACKS. Battery packs may explode, causing personal injury or damage. Toxic fumes and materials are created when battery packs are burned. 12. DO NOT CRUSH, DROP, OR DAMAGE battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over, or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). 13. DO NOT DISASSEMBLE. Incorrect reassembly may result in the risk of electric shock, fire or exposure to battery chemicals. If it is damaged, take it to a MILWAUKEE service facility. 14. BATTERY CHEMICALS CAUSE SERIOUS BURNS. Never allow contact with skin, eyes, or mouth. If a damaged battery pack leaks battery chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed to battery fluids, wash with soap and water and rinse with vinegar. If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek medical attention. Remove and dispose of contaminated clothing. 15. DO NOT SHORT CIRCUIT. A battery pack will short circuit if a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a battery pack near anything that may cause a short circuit, such as coins, keys or nails in your pocket. A short circuited battery pack may cause fire and personal injury. 16. STORE YOUR BATTERY PACK AND CHARGER in a cool, dry place. Do not store battery pack where temperatures may exceed 120°F (50°C) such as in direct sunlight, a vehicle or metal building during the summer. Charger will charge the battery when the battery's internal temperature is between 14°F (-10°C) and 150°F (65°C). When the battery temperature is outside that range, charging will not occur. READ AND SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE. Specifications Catalog No. Volts DC 48-11-1815 1.4 Ah Li-Ion Battery Pack 18 Catalog No. Input Volts AC Input Amps Output Volts DC Output Amps 48-59-1801 Charger * 120 2.1 18 3.5 * Charges MILWAUKEE 48-11-1815 Lithium-Ion 3 FUNCTIONAL DESCRIPTION MILWAUKEE LITHIUM-ION BATTERY PACK OPERATION 1 Fuel Gauge OFF, immediately reduce pressure on the 1. Contacts application or release the trigger. If the tool Use the Fuel Gauge to determine the battery does turn off, release the trigger to reset. If 2. Fuel Gauge pack's remaining run time. Press the Fuel this happens repeatedly, the battery pack Gauge button to display the lights. The Fuel 3. Fuel Gauge button will shut down and need to be placed on the Gauge will stay lit for two seconds. 4. Release buttons charger to reset. Under extreme circumstances, the internal temperature of the battery could become too high. If this happens, the battery pack will shut off. Remove the battery pack from the tool and place it on the charger to reset it. 78-100% 55-77% 33-54% 10-32% Approximate Run Time Remaining To determine if the battery pack needs to be placed on the charger to be reset, press the fuel gauge button. If the bottom gaugeLess than 10% if bottom light is flashing flashes once, the battery must be reset on the charger. NOTE: If the Fuel Gauge doesn't appear to be working, place the battery pack on the Cold Weather Operation 5. Cord charger and charge as needed. The MILWAUKEE Lithium-Ion battery pack 6. Nameplate Label Unlike other battery pack types, MILWAUKEE can be used in temperatures down to -4°F. 7. Electrical contacts Lithium-Ion battery packs deliver fade-free When the battery pack is very cold, put the 8. Bay power for their entire run time. The tool will battery pack on a tool and use the tool in a not experience a slow, gradual loss of power light application. It may “buzz” for a short time 9. Vents as you work. To signal to you that the battery until it warms up. When the buzzing stops, 10 . Serial Number (on bottom of charger) pack is at the end of its run time and needs use the tool normally. 11. Light indicator - when a battery pack is inserted into to be charged, power to the tool will drop the charger, the light will indicate the following situations: quickly. When this happens, remove the tool Maintenance and Storage from the workpiece and charge the battery Continuous red light: Charging Do not expose your battery pack or cordless pack as needed. tools to water or rain, or allow them to get Continuous green light: Charging is complete NOTE: Immediately after using the battery wet. This could damage the tool and battery pack, the Fuel Gauge may display a lower pack. Do not use oil or solvents to clean or Flashing red light: Battery pack is too hot or too cold - Charging will begin charge than it will if checked a few minutes lubricate your battery pack. The plastic casautomatically when battery reaches correct charging later. The battery cells "recover" some of their ing will become brittle and crack, causing a temperature charge after resting. risk of injury. Store battery packs at room temperature Flashing red and green light: Damaged or faulty battery pack Batte...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: