Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
for other than intended use. Maintain labels and nameplates. 15. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. The warnings, precautions, and 16. instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Save these Instructions. Power Cord Safety A short power supply cord is to be 1. provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available 2. and may be used if care is exercised in their use. Follow all directions when using a long extension cord. If a long extension cord is used, 3. the marked electrical rating of the a. (detachable power supply cord or) extension cord should be at least as great as the electrical rating of the appliance, if the appliance is of the grounded b. type, the extension cord should be a grounding type 3-wire cord, and the longer cord should be arranged c. so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. UNPACKING When unpacking, check to make sure that the item is intact and undamaged. If any problem exists, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. REV 09e Operation Place the Fast Battery Charger on 1. a flat, smooth, dry surface near an electrical outlet. Insert 1 to 4, D, C, AA, AAA batteries, 2. or 1 to 2 9V batteries in the Battery Compartment. DO NOT MIX NiCd (NICKEL-CADMIUM) AND NiMH (NICKEL-METAL HYDRIDE) BATTERIES. 3. Slide the Battery Type Switch to select the correct type of battery. For Nickel-Cadmium batteries, set the Battery Type Switch to the NiCd position. For Nickel-Metal Hydride batteries, set the Battery Type Switch to the NiMH position. See illustration. Plug the Charger into a correct house4. hold electric outlet. The LED (CH 1, CH 2, CH 3 or CH 4) will glow red color to indicate the proper charging. After the proper charge time is reached (5 hours for NiCd and 8 hours for NiMH, except for 9V of both types, and NiMH D Cells), the red lights will turn off and the trickle charge is on. The charged batteries are now ready for use. See illustration. Unplug the Fast Battery Charger and 5. remove all batteries when not in use. Note: When 9V batteries are placed in the Charger the green light at the top of the Charger will come on. After 10 Hours for NiCd (110 mAh) and 15 hours for NiMH (150-160 mAh), remove the 9V batteries from the Charger. The 9V batteries are now ready for use. Note: The charging of 9V batteries is by manual control. You must observe the charging time. Periodically check the condition of the charger and batteries. Do not over charge the batteries. The green light will stay on until you remove the 9V batteries fr...
Эта инструкция также подходит к моделям:Зарядные устройства - 47618 (383.45 kb)
Зарядные устройства - 47618 (383.45 kb)