Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
4 “Super” button/ indicator forultra-fast freezing This button turns the ultra-fast freezing function on and off. The indicator on the button itself shows when the function has been activated. Large quantities of food can be frozen at the same time using this function. It is recommended that the function be turned on 24 hours before putting the fresh food in the freezer. When the function is activated, the appliance works so that the lowest possible temperature is reached inside the freezer (very cold). en The “Super” ultra-fast freezing function turns itself off automatically when the food has been frozen (this process may take up to two days). This function may be turned off manually by pressing ultra-fast freezing button 4 for a second time. Climate class - Maximum room temperatures Each appliance’s climate class is shown on its characteristics plate and indicates what temperature ranges the appliance is designed to work in. Climate class Room temperature SN +10 °C to 32 °C N +16 °C to 32 °C ST +18 °C to 38 °C T +18 °C to 43 °C Ventilation Figure E The hot air produced between the appliance and the wall behind it must be allowed to escape easily, otherwise the appliance shall have to work harder than necessary and thereby incur high and unnecessary electricity consumption. For this reason, the ventilation and air openings must never be blocked. Usable capacity Information on the usable capacity can be found inside your appliance on the rating plate. Connecting theappliance / Turning iton / Setting the temperature Clean the appliance before turning it on for the first time. Connecting the appliance The mains electricity supply socket must be easily accessible. Connect the appliance to a 220-240 V (N/SN) or 220230 V (ST)/50 Hz AC electricity current via an earthed electricity socket fitted in accordance with relevant standards. The connection must be protected by a fuse of at least 10 amps. When an appliance is to be used in a Non-European country, it is necessary to check that theconnection voltage and the type of current described on the appliance’s characteristics plate are the same asthe national mains electricity system. The characteristics plate is on the bottom left-hand side inside the refrigerator compartment. Should it be necessary to change the mains electricity supply plug, then this mustbe carried out by the brand’s specialist technicians. Warning! Do not under any circumstanceswhatsoever connect the appliance to electronic energy-saving connection devices (e.g. Ecoboy, Sava Plug, etc.) or inverse rectifiers which convert DC currents into 230 AC currents (e.g. solar energy systems, maritimeelectricity systems). en Connecting the appliance Figure W Press button 1 to turn the appliance on. The light inside will come on when the door is opened. The refrigerator is factory set to +4.C Setting the temperature The set temperatures can be changed. See the descriptions in the following sections: 2 Refrigerator temperature setting button When the appliance has been turned on, the indicator light will flash until working temperature has been reached. When working tempe...
Эта инструкция также подходит к моделям:Холодильники - KSV32320CH/02 (1.24 mb)
Холодильники - KSV32320CH/03 (1.24 mb)
Холодильники - KSV32320CH/04 (1.24 mb)
Холодильники - KSV32320FF/01 (1.24 mb)