Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If an appliance in the SN climate class is operated at lower ambient temperatures, damage to the appliance can be excluded up to a temperature of +5 °C. Ventilation Figure * The air on the appliance's back panel and side panels heats up. The heated air must be able to escape unimpeded. Otherwise, the refrigerating unit has to work harder, which increases the appliance's power consumption. Therefore: You must never cover or block the ventilation openings! en Connecting the appliance After setting up the appliance, wait for at least 1 hour before starting the appliance up. The oil contained in the compressor may have been displaced into the refrigeration system during transport. Before starting the appliance up for the first time, clean its interior (see section "Cleaning the appliance"). Electrical connection The socket must be near to the appliance and easily accessible after the appliance has been installed. The appliance conforms to protection class I. Connect the appliance to a 220-240 V/50 Hz alternating current supply using a socket with protective earthing conductor which has been correctly installed. The socket must be protected by a fuse with a rating of 10 A to 16 A. In the case of appliances operated outside of Europe, check whether the voltage and type of current specified conform to the values of your electricity grid. You will find this information on the rating plate, figure +. ! Warning The appliance must never be connected up to an electronic energy-saving socket. Sinusoidal-commutated and line-commutated inverters can be used with our appliances. Line-commutated inverters are used with photovoltaic systems that are connected directly to the national grid. Sinusoidal-communicated inverters must be used with standalone applications (e.g. on ships or mountain huts) that do not have a direct connection to the national grid. Getting to know the appliance Fold out the last page that contains the figures. These instructions for use apply for several models. Deviations between the figures are possible. Figure ! * Not available on all models 1.5 Control panel 6 Interior light * 7 Basket * 8 Storage compartment 9 Condensation drainage with drain plug 10 Rating plate 11 Pre-freezing compartment * 12 Removable separating wall * en Control panel Figure " 1 "eco" setting If the appliance is only partially filled (on appliances with a separating wall, maximum fill level is up to the "e" marking on the separating wall), this setting can be selected in order to save energy. 2 Temperature selector To adjust the freezer compartment temperature, turn the temperature selector using a coin. Position 1: Highest temperature Position 6: Lowest temperature 3 "alarm" indicator The red indicator lights up if the freezer compartment is too warm. 4 "power" indicator The green indicator lights up if the appliance is switched on. 5 "super" button This is used to switch the SuperFreezing function on and off. The yellow indicator lights up if the SuperFreezing function is switched on. en Putting the appliance into operation Switching on the appliance • Once it is connected, the appliance is switched on and the green indicator figure "/4 lights up. • If the red indicator lights up (figure "/3), this means that the temperature in the appliance is too high and you must only put frozen food in the freezer once this red indicator has gone out. Setting the temperature The temperature selector is set to position 4 at the factory. To change the temperature, turn the temperature selector, figure "/2. Position 1: Highest temperature Position 6: Lowest temperature Important: Changes to the temperature take time to come into effect. Notes on using the appliance • When you switch on the appliance, the temperature for the freezer compartment is automatically set to approx. -18 °C if no temperature has been entered. • If you cannot open the lid immediately after closing the chest, please wait for two to three minutes until the resulting vacuum has been compensated for. Warning messages Temperature alarm If the temperature in the freezer compartment becomes too warm (approx. -9 °C) and the frozen food is at risk, the "alarm" indicator lights up, figure "/3. Utilisable volume You will find information regarding the utilisable volume on the rating plate. Figure + Using th...
Эта инструкция также подходит к моделям:Холодильники - GC24MAW20N/02 (1.94 mb)
Холодильники - GC27MAW40/01 (1.94 mb)
Холодильники - GC33MAW40/01 (1.94 mb)
Холодильники - GC34MAW20N/01 (1.94 mb)