Оценок - 7, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Power Freezer mode must be activated before putting large stuff in freezer compartment at least 20 hours before. Alarm/ Hold 3 sec for Filter Reset Button Press the Alarm button( ) to turn off the door open alarm. After removing the old water filter and installing a new one, reset the Indicator by pressing and holing the “Alarm” button for 3 seconds. The indicator will light again in about 6months to let you know it is Time to change your water filter. 1 2 3 4 5 6 87 1 2 3 Alarm/ Hold 3 sec for Filter Reset Button The filter Indicator will be Blue when you initially insert the water filter. The filter Indicator will be Light Pink when you have used your water filter for 5 months. The filter Indicator( ) will be Red when you have used your water filter for 6 months. Lighting Button Press the Lighting button( ) to turn on the dispenser LED lamp. Fridge/ Hold 3 sec for Power Cool Button Press the Fridge/Hold 3 sec for Power Cool button( ) to set the fridge to your desired temperature. You can set the temperature between 1 .C and 7 .C. Press and hold the Fridge/Hold 3 sec for Power Cool button for 3 seconds, to speed up the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open). Press and hold the button for 3 seconds again to cancel the Power Cool mode. Ice Off / Hold 3 sec to Child Lock Press the Ice Off button( ) to turn the ice making function off. If you press and hold the Ice Off button for 3 seconds, the display and dispenser will be locked. Ice Type Button Press the Ice Type button to select your desired ice type. Cubed and crushed ice modes will be alternatively changed whenever you press the button. After selecting, push the dispenser Lever gently with your glass. This mode can not be used with the Water mode simultaneously. Water Button Press the Water button to dispense water. There is no Off mode additionally. After selecting, push the dispenser Lever gently with your glass. This button can not be used with the Ice Type button simultaneously. Water mode will be off if you press the Ice Type button. Some functions are activated after a few- second delay when the buttons are pressed, while others operate immediately. This is normal operation. 4 5 6 7 8 3 USING THE CONTROL PANEL Basic temperature of Freezer and Refrigerator Compartments The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -19 °C and 3 °C respectively. If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually. Controlling the Freezer temperature The Freezer temperature can be set between -14 .C and -22 .C to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like ice cream may melt at -15 .C. The temperature display will move sequentially from -22 .C to -14 .C. When the display reaches -14 .C, it will begin again at -22 .C. Controlling the Refrigerator temperature The Refrigerator temperature can be set between 7 .C and 1 .C to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display. -The temperature of the Freezer, Refrigerator or pantry room may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside. - This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normal set temperatures, the blinking will stop. - If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in. - The temperature of the pantry room may be a little different according to the location inside. - If communication between display and Main Controller errors, Pantry display light may blink. Once the pantry room return to their normal set temperatures, the blinking will stop. If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center. USING THE COLD WATER DISPENSER Press the Ice / Water button to select the type of you want. • Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out. • Please wait 2 seconds before removing the glass under the dispenser to prevent spills. If the Refrigerator door opens, the dispenser does not work. • When Cubed Ice is selected after using the Crushed Ice featu...
Эта инструкция также подходит к моделям:Холодильники - RFG23DERS (26.11 mb)