Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
3828JP8011N INSTALLATION 3 CONTENTS FEATURE CHART........................................4 OPERATION..................................................5 Starting Temperature Control Ice Making Fresh Zone Defrosting Deodorizer (Optional) Vitamin Kit (Optional) SUGGESTIONS ON FOOD STORAGE......8 REPLACEMENT OF DOOR OPENING TYPE ..............................................................9 Precaution How to replace the door opening type CLEANING ..................................................11 GENERAL INFORMATION .......................11 LAMP REPLACEMENT.............................12 IMPORTANT WARNINGS .........................12 BEFORE CALLING FOR SERVICE .........13 2 THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE LATEST IN TECHNOLOGY. WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE AND RELIABILITY. BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS. The working life of this set is 7 years since the date of delivery to consumer. INSTALLATION SELECT A GOOD LOCATION 1. Place your refrigerator where it is easy to use. 2. Avoid placing the refrigerator near heat sources, direct sunlight or moisture. 3. Air must circulate properly around your refrigerator to ensure efficient operation. If your refrigerator is placed in a recessed area in the wall, allow at least 10 inches (25 cm) or greater clearance above the refrigerator and 2 inches (5 cm) or more from the wall. The refrigerator should be elevated 1 inch (2.5 cm) from the floor, especially if the floor is carpeted. 4. To avoid vibrations, the refrigerator must be level. If necessary, adjust the leveling screw(s) to compensate for unevenness of the floor. To close the doors easily, the front should be slightly higher than the rear. Leveling screw(s) can be turned easily by tipping the cabinet slightly. Turn the leveling screw(s) clockwise to raise the refrigerator, counterclockwise to lower it. NEXT 1. Wipe off all dust accumulated during shipping and clean your refrigerator thoroughly. 2. Install accessories such as the ice cube box, evaporating tray cover, etc., in their proper places. They are packed together to prevent possible damage during shipping. 3. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. 4. Prior to use, let the refrigerator run for 2-3 hours. Check the flow of cold air in the freezer compartment to ensure proper cooling has taken place.Your refrigerator is now ready for use. 3 FEATURE CHART FREEZER COMPARTMENT Twisting Ice Serve (Optional) or General Type Ice Making FreezerTemperature Control Knob Cap Hinge (Optional) REFRIGERATOR COMPARTMENT Chilled Compartment Refrigerator Temperature Electronic Control Lamp Deodorizer (Optional) Vitamin Kit (Optional) Vegetable Drawer Used to keep fruits and vegetables, etc. fresh and crisp. Cap Cover (Optional) Upper Hinge Freezer Door Rack Egg Storage Rack (GN-292,GR-292 only) Refrigerator Door Rack Leveling Screws > All parts shown may not be included with every model. 4 OPERATION STARTING When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting. TEMPERATURE CONTROL □ REFRIGERATOR The default setting of the temperature control button for the refrigerator compartment is NORMAL. You can set the refrigerator temperature using the Refrigerator Temperature Control. Whenever pressing the button, the LED emit light. The temperature of the compartment is highered as the LED luminesce from MIN to MAX. You can select the desired set point in five (5) steps between minimum and maximum. For the economic electricity, set the LED to the MIN position. Low Medium Low Medium Medium High High Temp Control o °° o o o o) ' o ° o o o O-) 1 AVERAGE TEMP(»C)* 6 4.5 3 1 -1 ROOM REFRIGERATOR This temperature can change based on the freezer temperature control setting. □ FREEZER The default setting of the temperature control knob for the freezer compartment is the MID point. For colder temperatures, adjust the control knob to MAX, and for warmer temperatures, adjust the control knob to MIN position. TEMP.CONTROL W I MIN MID MAX 5 OPERATION ICE MAKING Determine which type ice-making system you have. General Type To make ice cubes, fill the ice tray with water and place it on the ice cube box. Then insert the ice cube box in the freezer compartment. To remove ice cubes, hold the tray at its ends and twist gently. Twisting Ice Serve Type To make ice cubes, fill insert in its position. the ice tray with water and Ice Trays -Ice Cube Box o To remove ice cubes, hold the knob of the tray and turn gently. Then, ice cubes drop in the ice ...