Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Dimension (inch) Width Capacity (Cu. Ft) Model RS2544 RS2622/2644/2666 RS2777 26.1 without Hinge Case Height with Hinge with door Depth without door 36 69 70 35 30 27.2 36 69 70 37 30 25.2 36 69 70 35 28 Checking the Dimensions of your Entrance Door Selecting the Location for the Refrigerator Allow clearance to the right, left, back and top when installing the refrigerator. This has the advantage of reducing power consumption. Allow sufficient space to circulate the air at the internal cooling system. • When refrigerator has not enough space, the internal cooling system may not work correctly. NOTE 1 inch 0.1 inch 1 inch NOTE REMOVING THE REFRIGERATOR DOORS 1) Remove the screw from clamp ( ). 2) Remove the water tube by pressing the coupler (.) and pulling the water tube (.) away. Open the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise. a a FRONT LEG COVER SCREW Removing the Front Leg Cover Separating the Water Supply Line from the Refrigerator Do not cut the water tube but separate it from the coupler. NOTE REMOVING THE REFRIGERATOR DOORS 1) With the door closed, remove the upper hinge cover (.) using a screwdriver, and then disconnect the wires (.). 2) Remove hinge screws (.) and ground screw (.) counter-clockwise, and take off the upper hinge (.) along the arrow (.). Take care when removing the door to ensure that it does not fall on you. 3) Remove the door from the lower hinge (.) by carefully lifting the door (.). 4) Remove the lower hinge (.) from the bracket lower hinge (.) by lifting the lower hinge (.) in the direction of the arrow. Removing the Freezer Door • Lift the door straight up. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface. NOTE REMOVING THE REFRIGERATOR DOORS 3) Remove the door from the lower hinge (.) by lifting the door (.). 4) Remove the lower hinge (.) from the bracket lower hinge (.) by lifting the lower hinge (.) in the direction of the arrow. 1) With the door closed, remove the upper hinge cover (.) using a screwdriver, and then disconnect the wires (.). 2) Remove hinge screws (.) and ground screw (.) counter-clockwise, and take off the upper hinge (.) in the direction of the arrow (.). Take care when removing the door to ensure that it does not fall on you. Removing the Refrigerator Door Reattaching the Freezer Door REATTACHING THE REFRIGERATOR DOORS 1) Insert the lower hinge (.) in the bracket lower hinge (.). 2) Reattach the freezer door by inserting the hose (.) in the lower side of the door into the hole in the lower hinge (.) and pulling the hose down. 3) Insert the upper hinge shaft (.) into the hole (.). After levelling between the upper hinge hole (.) and the hole of the cabinet (.). Reattach hinge screws (.) and gound screw (.) in a clockwise direction. 4) Connect the wires. 5) Put the front part of the upper hinge cover ( ) on the front part of the upper hinge ( ) and reattach fr...
Эта инструкция также подходит к моделям:Холодильники - 24KLDW (2.07 mb)
Холодильники - RS21FANS (2.07 mb)
Холодильники - RS24DAMS (2.07 mb)
Холодильники - RS24DANS (2.07 mb)