Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Setting “1” means: Hightest temperature, warmest setting. Setting “6” (end-stop) means: Lowest temperature, coldest setting. At a low ambient temperature of around 16°C, setting “1” should be selected. At ambient temperatures of around 25°C, select setting “2”. If you require a lower temperature, select setting “3” or “4”. Important! High ambient temperatures (e.g. on hot summer days) and a cold setting on the thermostat (position”5” to “6”) can cause the compressor to run continuously. Reason: when the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance. The fridge will not be able to defrost since automatic defrosting of the fridge is only possible when the compressor is not running (see also "Defrosting" section). The result is the build up of a thick layer of frost on the fridge rear wall. If this happens, turn the thermostat knob back to a warmer setting (position “3” to “4”). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced. Interior Accessories Storage shelves Various glass storage shelves are included with your appliance. The height of the storage shelves can be adjusted: To do this pull the storage shelf forward until it can be swivelled + upwards or downwards and removed. Please do the same in reverse to insert the shelf at a different height. + VARIO glass storage shelf Your appliance is equipped with two half size glass storage shelves. Storing tall items: Slide the front half of the Vario storage + shelf in another level to the rear. By this means you will gain space to place tall items on the storage shelf below. Correct storage The length of storage time depends on the type of food - see manufacturer’s instructions. Tip: Food in the fridge should always be covered or packaged, to prevent drying and tainting of other food. The following are suited for packaging: – Polyethylene airtight bags and wraps; – Plastic containers with lids; – Special plastic covers with elastic; – aluminium foil. Defrosting The fridge defrosts automatically The rear wall of the fridge covers with frost when the compressor is running, and defrosts when the compressor is off. The water from the thawing frost evaporates by itself. Switching off the appliance + ++++ . To switch off the appliance, turn the temperature regulator to positi on "0". If the appliance is not going to be used for an extended period: Remove all refrigerated packages. Switch off the appliance by turning the thermostat knob to position "0". Remove the mains plug or switch off or disconnect from the electrici ty supply. Clean thoroughly (see section: “Cleaning and Care”). Leave the door open to avoid the build up of odours. Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! • The appliance must not be connected to the mains during cleaning. Danger of electrical shock. Before cleaning switch the appliance off and remove the plug from the mains, or disconnect from the electricity supply. • Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components and there is a danger of an electrical shock. Hot vapours can lead to the damage of plastic parts. • The appliance must be dry before it is placed back into service. Important! • Ethereal oils and organic solvents can attack plastic parts, e.g. – lemon juice or the juice from orange peals; – butyric acid; – cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. • Do not use any abrasive cleansers. + . Remove the food from the refrigerator. Store it in a cool place, well covered. Switch the appliance off and remove the plug from the mains, or disconnect from the electricity supply P F 3 2 1 P F 3 2 1 Clean the appliance and the interior accessories with a cloth and + lukewarm water. Commercially available dish washing detergents may also be used. . After cleaning wipe with fresh water and rub dry. An accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. The structure of the appliance permits you to clean the rear zone close to the wall, using a vacuum cleaner. . Remove the plinth (1), then the ventilation grid (2); . Carefully pull the air deflector out (3), checking that there is no water left from the defrosting. . Check the water drain hole (F) under the vegetable drawers of the fridge is not blocked. Clear a blocked drain hole with the aid of the green peg (P) in the pack of accessories included with the appliance. After everything is dry place appliance + back into service. Energy Saving Tips • Do not install the appliance near boilers, radiators or other sources of heat. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance....
Эта инструкция также подходит к моделям:Холодильники - 66000I (427.83 kb)
Холодильники - 66000I (427.83 kb)
Холодильники - 66000I (427.83 kb)
Холодильники - 66000I (427.83 kb)