Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Bosch, модель LI48630/01

Производитель: Bosch
Размер: 14.23 mb
Название файла:
Язык инструкции:itenesfrdenlpt
Перейти к скачиванию



Фрагмент инструкции


If you are cooking with fat or oil, e.g. chips, etc., never leave the cooker unattended. Never allow children to play with the appliance. Do not let adults or children operate the appliance unsupervised: – if they are mentally or physically unable to use the appliance safely and correctly, – if they don’t have the knowledge and experience to use the appliance safely and correctly. ! ! Do not flambe food directly under the extractor hood. Risk of grease filter catching fire due to flames. The hotplates must always be covered with a utensil. Restrictions apply to the use of the extractor hood over a solid-fuel burner (coal, wood, etc.). (See Installation instructions). Gas hobs / Gas cookers Do not use all the gas hotplates simultaneously for a prolonged period (max. 15 minutes) at maximum thermal load, otherwise there is a risk of burns if the housing surfaces are touched or a risk of damage to the extractor hood. If the extractor hood is situated over a gas hob, operate the hood at maximum setting if three or more gas hotplates are operated simultaneously. Operating the extractor hood The most effective method of removing vapours produced during cooking is to: . Switch the ventilator ON as soon as you begin cooking. . Switch the ventilator OFF a few minutes after you have finished cooking. . The fans in this appliance can be switched to the desired setting by hand (manual mode) or can be controlled fully automatically with the automatic function according to your requirements (automatic mode). Switching on manual mode: Press the Lor + button. . The fan starts at Setting }. Appliances without automatic mode: Fan – off – Fan – on – Fan settings Fan settings – lower – – higher – Intermittent ventilation Light on / off Fan on / off Display: . Fan settings / Intensive setting . Saturation – grease filter # . Saturation – activated carbon filterr a Switching on the fan settings/intensive setting: 1. To increase the fan settings or switch on the intensive setting c, press the + button. . The intensive setting operates at maximum power which should be used only briefly. If the intensive setting is not switched off manually, the fan automatically switches back to Setting }after 10 minutes. 2. To switch off the intensive setting cor switch back to fan settings ~ – } – | and switch off the extractor hood completely, press the – button. Appliances with automatic mode: (Ultraschall-Sensor) Fan – off – Automatic mode Fan settings – lower – / Manual mode Fan . Saturation – on / off grease filter # Fan – on – Fan settings – higher – Intermittent ventilation Light on / off Display: . Fan settings / Intensive setting . Saturation – activated carbon filterr a Switching over to automatic mode: . To switch from manual mode to automatic mode at any time, press the U button. Operating the extractor hood Switching on automatic mode: Press the Ubutton. . The fan runs at least at Setting |. Fan settings: . If required, the optimum fan setting is actuated automatical...

Эта инструкция также подходит к моделям:
Вытяжки - LI48630/02 (14.23 mb)
Вытяжки - LI48630/03 (14.23 mb)
Вытяжки - LI48631/01 (14.23 mb)
Вытяжки - LI48631/02 (14.23 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории