Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Never use strong and abrasive cleaning agents. Items placed on the appliance may damage the appliance or adjacent cooktops when the appliance is extended or retracted. Do not place any objects on the moving parts of the appliance. Environmental protection Unpack the appliance and dispose of the packaging in an Environmental protection environmentally-responsible manner. This appliance is labelled in accordance with the European Directive 2012/19/EU concerning used electrical and electronic appliances (WEEE – waste electrical and electronic equipment). The guideline determines the framework for the return and recycling of used appliances as applicable. Operating modes This appliance can be used in exhaust-air mode or circulating- air mode. Exhaust air mode The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system. Note: The exhaust air must not be conveyed into a functioning smoke or exhaust gas flue or into a shaft which is used to ventilate installation rooms which contain heating appliances. ¦ Before conveying the exhaust air into a non-functioning smoke or exhaust gas flue, obtain the consent of the heating engineer responsible. ¦ If the exhaust air is conveyed through the outer wall, a telescopic wall box should be used. Air recirculation The air which is drawn in is cleaned by the grease filters and an activated carbon filter, and is conveyed back into the kitchen. Note: To bind odours in air recirculation mode, you must install an activated carbon filter. The different options for operating the appliance in air recirculation mode can be found in the brochure. Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service or from the Online Shop. Getting to know the appliance Here, you can get to know your appliance and receive information about the accessories. Control panel Explanation 1 Retract/extend the appliance, switch the fan on and off 2 Switch on lighting 3 Turn the fan down 4 Display panel 5 Switch fan setting up 6 Intensive setting 7 Fan run-on time 1 Control panel 2 Light 3 Filter cover Operating the appliance This appliance only works when it is completely extended. Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes. Extending/retracting the appliance: Risk of injury! Risk of jamming when retracting and extending the appliance. Never reach into the moving area of the appliance while it is being retracted or extended. Keep children at a safe distance. : Risk of injury! Cookware set down within the movement area of the appliance can fall over. Hot liquids that pour out can cause injury. Do not set down any cookware within the movement area of the appliance. Extending the appliance 1. Remove any objects from the area of movement of the appliance. 2. Press the # button. The appliance extends fully. The fan starts at setting 2. Retracting the appliance Note: The filter cover must be closed completely. 1. Remove any objects from the area of movement of the appliance. 2. Press and hold the # button for two seconds. The appliance retracts fully. The light and fan are automatically switched off. Setting the fan Note: Always adjust the fan strength to meet current conditions. If there is a large build-up of steam or fumes, select a high fan setting. Switching on ¦ Press the # button. The fan starts at setting 2. ¦ Press the + or -button to change the fan strength. Switching off Press the # button. Intensive setting You can use the intensive setting if there is a large build-up of odours and fumes/vapours. Press the › button while ventilation is switched on. The intensive setting is activated. After 10 minutes, the electronics automatically turn the appliance down to the previously set ventilation setting. If you wish to end the intensive setting before this time expires, press the › button. Fan run-on time Press the xbutton. The fan continues to operate for a further 15 minutes at level 1, and then switches off automatically after this time. The remaining run-on time is displayed in minutes on the display panel. If the lighting is switched on, this is also switched off after this time. Press the xbutton to end the fan run-on time early. Lighting The lighting can be switched on and off independently of the ventilation. Press the @button. Setting the brightness ¦ Press and hold the @button for 2 seconds. The brightness is reduced. ¦ Press the @button to reset to the maximum brightness. Saturation display When the metal grease filter or activated charcoal filter is saturated, the corresponding symbol flashes: ¦ Metal grease filter: . ¦ Activated charcoal filter: ’ When this happens, do not delay cleaning the metal grease filter or replacing the activated charcoal filter any further. For instructions on how to clean the metal grease filter, please refer to the...
Эта инструкция также подходит к моделям:Вытяжки - LD97AA670/02 (3.7 mb)
Вытяжки - LD97AA670B/01 (3.7 mb)
Вытяжки - LD97AA670B/02 (3.7 mb)