Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
An activated carbon filter must be installed to bind odours in circulating-air mode (see ”Removing and installing the grease filters”). The complete installation set as well as the replacement filters are available from specialist outlets, customer service or the Online Shop. The accessory number can be found at the end of the operating instructions. Operation • The description of the operation applies to several appliance models. It is possible that individual features are described which do not apply to your appliance. Light Fan offOn / Off Switch back fanSwitch on and increase fan – Intensive setting Display fan settings Light On / OffFan off Switch back fanSwitch on and increase fan – Intensive setting Display fan settings NOTE: It is recommended to switch on the blower when you start cooking and not to switch it off again until several minutes after you have finished cooking. In this way the kitchen fumes are removed most effectively. Switching on the fan and selecting the fan settings • Press button +. If kitchen fumes are thicker, press button + again. The fan setting is increased by one. • To switch back by one setting, press button –. Switching off the fan • Press button 0. or • Keep pressing button – until the fan switches off. Light • The light can be switched on and off independently of the fan. Intensive setting The Intensive settingcgenerates maximum performance. It can be used if thick fumes or strong odours occur temporarily. • Keep pressing button + until cis displayed. • If the Intensive setting is not switched off by hand, the fan automatically switches back to setting 2 after 10 minutes. Cleaning and care LOOKING AFTER THE APPLIANCE • Suitable cleaning agents and care products for your appliance can be purchased via the Hotline or from the Online Shop (see cover page). Appliance surfaces NOTE: Observe the warranty regulations in the enclosed service booklet. • The appliance surfaces and controls are scratch-sensitive.Therefore observe the following cleaning instructions: – Avoid cleaning the extractor hood with dry cloths, abrasive sponges, scouring agents, cleaning agents containing sand, soda, acid, chlorine or any other aggressive substances. – Clean the appliance surfaces and controls with a soft, damp cloth, washing-up liquid or a mild window cleaner only. – Do not scrape off dried dirt, but moisten with a damp cloth. – Clean carefully in the area of the controls to avoid liquid from getting into the electronics. NOTE: Clean the stainless steel surfaces in the direction of the ground surface only! Do not use stainless steel cleaner for the control buttons! Metal-mesh grease filters • The metal-mesh grease filters absorb the grease particles from the kitchen fumes. • The filter mats consist of fire-proof metal. RISK OF FIRE As the filters become more saturated with greasy residue, the flammability increases. The function of the extractor hood may also be impaired. • The risk of fire is prevented by cleaning the metal-mesh grease filters in good time. • When cleaning the grease filters, also remove grease deposits from the accessible parts of the housing with a damp cloth. Cleaning the metal-mesh grease filters ... • Under normal operation (daily 1 to 2 hours), the metal-mesh grease filters must be cleaned 1x month. ... in the dishwasher • The metal-mesh grease filters can be cleaned in the dishwasher. Slight discolouration may occur but this will not affect the function of the grease filters. • The filters must be placed loosely in the dishwasher. They must not be wedged in. NOTE: Do not clean heavily saturated metal- mesh grease filters together with utensils. ... by hand • When cleaning by hand, soak the grease filters in a hot detergent solution, brush off the dirt, rins...
Эта инструкция также подходит к моделям:Вытяжки - LC657GA40/01 (2.74 mb)
Вытяжки - LC756GA40/01 (2.74 mb)
Вытяжки - LC856GA40/01 (2.74 mb)
Вытяжки - LC956GA40/01 (2.74 mb)