Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. When cleaning the filters by hand, soak them in hot soapy water first of all. Do not use aggressive, acidic or caustic cleaners. Then brush the filters clean, rinse them thoroughly and leave the water to drain off. Removing and inserting the metal grease filters: Warning: The halogen bulbs must be switched off and cool. 1. Press the handles on the grease filters downwards and fold the grease filters down. Fig. 1. 2. Clean the filters. 3. Insert the clean filters back into the hood. 4. Clearing the # display. Press the 0 button 2 x in succession. A signal sounds and the # display goes out. Activated carbon filter: For neutralizing odours in recirculating mode. Caution: As the filter becomes more and more saturated with grease, there is an increased risk of fire and the function of the extractor hood may be impaired. Important: Change the activated carbon filter promptly to prevent the risk of fire from the accumulation of heat when deep-fat frying or roasting. Saturation indicator: b When the activated carbon filter becomes saturated, the display symbol a lights up and a signal sounds. The signal is switched off when the fan is switched off. The activated carbon filter should be replaced straight away. Filters and maintenance Inserting the filter: Warning: The halogen bulbs must be switched off and cool. 1. Remove the metal filters (see "Removing and inserting the metal grease filters"). 2. Insert the activated carbon filter. Fig. 2. 3. Raise the activated carbon filter in front and rotate the closures by 90°. Fig 3. 4. Insert the metal grease filters (see "Removing and inserting the metal grease filters"). 5. Cancel the a in the display. . Press the 0 button twice in rapid succession. A signal sounds and the display symbol a goes out. Removing the filter: Warning: The halogen bulbs must be switched off and cool. 1. Remove the metal filters. 2. Rotate the closures by 90° and remove the activated carbon filter downwards. Fig. 3. 3. Insert the metal grease filters. Replacing the activated carbon filter: . During normal operation (1 to 2 hours per day) the activated carbon filters should be replaced approximately 1 x year. . A replacement filter can be obtained from any authorized dealer. . Use original filters only. By doing so you will obtain maximum performance from your extractor hood. Disposing of the old activated carbon filter: . There are no pollutants in the activated carbon filters. They can therefore be disposed of as part of your normal domestic refuse. Cleaning and care Isolate the extractor hood by pulling out the mains plug or switching off the fuse. Do not clean the extractor hood with abrasive sponges or with cleaning agents which contain sand, soda, acid or chlorine! . Clean the extractor hood with a hot soap solution or a mild window cleaner. . Do not scrape off dried-on dirt but wipe off with a damp cloth. . When cleaning the grease filters, remove grease deposits from accessible parts of the housing. This prevents the risk of fire and ens...
Эта инструкция также подходит к моделям:Вытяжки - DIA096751/01 (1.03 mb)
Вытяжки - DIA096751B/01 (1.03 mb)
Вытяжки - DIA096751R/01 (1.03 mb)
Вытяжки - DWT126851/01 (1.03 mb)