Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
• Do not handle the unit with wet hands. Doing so may result in electrical shock, serious injury or death. Thoroughly dry your hands before handling any part of the air purifier. CAUTION! • Do not unplug by pulling on the cord. Doing so may result in electrical sparks and fire. Unplug the unit by grasping, and pulling the plug. • Hair, loose clothing and body parts may get caught in the machine resulting in injury. Keep hair, loose clothing and body parts away from openings and moving parts. Placement Warnings WARNING! ! • Do not use the air purifier outdoors or on wet surfaces. Doing so may result in electric shock, serious injury or death. Use only indoors and under dry conditions. • Do not use the air purifier in an enclosed space where flammable, combustible or explosive gases are present. • Do not use in an area where toxic vapors, flammable dust or oxygen tanks are present. Doing so may result in serious injury or death. Check the location and make sure these elements are not present. CAUTION! • Do not place open flames, including candles, directly in front of the air purifier. • Keep objects away from the air intake grille. It is important to consider the following when deciding on where to locate the air purifier: • Position the air purifier on a flat, solid, stable surface. Never place the unit on soft surfaces such as a bed or sofa. • Position the air purifier where the dirty air is not drawn across your head or body while sitting or sleeping. • Position the air purifier so the plug on the power cord easily reaches a standard electrical outlet for a polarized plug. • Do not use an extension cord. • Do not place the air purifier near sources of heat, such as stove tops, ovens, radiators or computers. Note: A polarized plug has one rounded prong and one straight prong. The rounded end goes into the longest socket slot. SAVE THESE INSTRUCTIONS Features 1. Air Revitalizer (Anion): On this model, this button activates the Air Revitalizer feature which is designed to run continuously, but may be turned OFF if desired. Provides additional air freshness via the release of negative ions, which can also cause dust particles to clump together and fall out of the air passing through the air purifier. You may notice faster dust buildup on the unit and surrounding objects with the Air Revitalizer turned ON. 2. HEPA Filter: effectively filters the dust particles, pollen and bacteria above 0.3 microns in the air, thus achieving the effect of purifying the air and keeping the air fresh. 3. Exhaust Grille: Directs the flow of air as it exits the unit. 4. Speed Indicator: Starts with one fan symbol for the lowest motor speed to all three symbols for full motor speed. 5. Motor Speed/Power Button: Press the speed button repeatedly to select the desired speed. • Low for the quietest operation, cleaning the air as effectively but more slowly than the high setting. • Medium for normal use • High for maximum cleaning 6. Air Intake: Air enters here for the first stage of cleaning. 7. Remote Control: Remotely turns the Power ON/OFF adjusts the Air Revitalizer (Anion) feature, Motor Speed and Timer. Operation 1. Place. Locate the air purifier on a hard surface such as a table or desk. Be sure the grille is not blocked by other objects and there are no candles or flames near the unit. 2. Plug In. Plug into nearest standard electrical outlet that accepts a polarized plug. 3. Select the air cleaning speed. Press the motor speed/power button until you reach the desired speed. TIPS for cleaner air 3 Position so that the air is not drawn across the head or body. 1 Maintenance Replacing the HEPA Filter 2 5 6 6 1. Unplug the air purifier. 2. Firmly pull the upper part of the Front Cover to open. 3. Remove the Front Cover. 4. Pull the tabs located on the bottom portion of the HEPA Filter to remove. Discard old filter. 5. Insert top of the new HEPA Filter into the Filter Cavity and then slide in the bottom. 6. Insert bottom of the Front Cover and rotate it forward. Firmly push on the upper sections of the Front Cover to snap it in place. Part Number Part Number HEPA filter, 3 pack AIRHEPA3PK Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. Problem Check Solution Unit does not turn ON • Power Cord • Selector Switch • Plug in Power Cord • Set Selector Switch for desired blower speed. Unit has high noise level. Check for dirty HEPA Filter • Replace HEPA filter if desired. Unit still does not operate properly. Check all the above points. Contact Oreck for service. Warranty ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not for resale, from Oreck or an Oreck Authorized Retail Dealer.) Oreck will repair or replace, free of charge, to the original pur...