Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Remove the front panel by lifting from the bottom and pulling up. . Remove the white Medium Filter from the black frame to discard the plastic wrapping. Return the filter to its frame. . Remove HEPA Filter and discard plastic wrapping. 6. Remove the Customized Filter from the black frame to discard plastic wrapping. Return the filter to its frame. Make sure the front of the filter is facing up. See Customized Filter chart on the next page to identify the front of your specific filter. . Pull out the Activated Carbon Filter and discard plastic wrapping. RabbitAir 24/7 CUSTOMER CARE | For questions, call 888.866.8862 Visit us at Next Page . Remove the fillter case by grasping the handles on either side and pulling forward. Lay the filter case on a flat surface. . Pull the tabs on the front of the Pre-filter to remove it. Finishing up! Do not operate the unit until completing these steps first 8. Return the filters to the filter case in the following order from back to front: Activated Carbon Filter, Customized Filter, HEPA Filter, Medium Filter, Pre-filter. (See diagram at right) П Medium Filter BioGS HEPA Filter Customized Filter * Charcoal Based Activated Carbon Filter Pre-filter tabs . Return filter case to the unit. Slide the bottom of the case back into the unit (1), then press the top in (2). . Reattach the front panel by latching the top hooks, then securing the bottom of the panel. Filter case Front panel Know your Customized Filter! Front Back Toxin Absorber Customized Filter: Front color: Purple Back color: Black Pet Allergy Customized Filter: Front color: purple & orange Back color: Orange Germ defense Customized Filter: Front color: Purple & Yellow Back color: Yellow Odor Remover Customized Filter: Front Color: Black (thicker fabric like material) Back color: Black Rabbil Air 24/7 CUSTOMER CARE | For questions, call 888.866.8862 Visit us at www.rabbitair.com...