Оценок - 4, средний балл: 4 ( )

Производитель: Quantum Размер: 163.56 kb Название файла: Язык инструкции:

05 PPM. The QUANTUM PURE AIRE CORP. AIR TREATMENT SYSTEM is designed to create the above-mentioned level of ozone in your indoor environment. By doing so, ozone will be introduced into your home or office and will clean your domestic air as it does the outside air...NATURALLY! Page -3 control panel for light commercial with sensor Contaminant Level Contaminant Status High Medium Low 1 5 10 MANUAL AUTO Contaminant Neutralize Contaminant Present 03 Active OFF ON Light Commercial UNDERSTANDING HOW YOUR UNIT WORKS air treatment system with puri- 1. Contaminant Neutralized: This Green Light indicates that the contaminants are neutralized and the sensor is in standby mode. In this mode, the fan will run continuously and the unit will monitor the levels of impurities in the air. When the air contains very little or no contaminant the light remains on. NOTE: when the unit is first turned on, this light will blink on and off for about 3 minutes as the unit warms up. It will remain ON when the unit is ready to operate. 2. Contaminant Present: This Red Light indicates the presence of sufficient impurities in the air to signal the system to begin the cleaning process. 3. O3 Active: This Green Light will turn ON whenever ozone is generated. 4. Contaminant Levels: These Yellow Lights indicate the levels of impurities as HIGH, MEDIUM & LOW. When the purification process is complete, all Yellow Lights will turn off. 5. ON/OFF Control Knob: This Knob must be in the ON position to operate the unit in either mode. 6. Auto/Manual Control Knob: You have a choice of one of two modes. Auto Mode: In this mode, the unit will operate under the control of the puri-stat. The air quality will be monitored and treated by the unit automatically. Manual Mode: In this mode, the unit will by-pass the sensor circuit and allows the user to operate the unit manually. By turning this knob clockwise, the fan speed is decreased. NOTE: On this mode the unit will generate ozone continuously. Page -4 control panel for light commercial with out sensor 89 10 Light Commercialair treatment system 567 03 Active POWER ON ON OFF UNDERSTANDING HOW YOUR UNIT WORKS 1. On / Off knob: Turning the knob clockwise to the ON position will turn the machine on. Turning this knob clockwise will also control the fan speed. A higher speed will produce more Ozone. 2. O3 Active: This green light will turn ON to indicate that Ozone is generated. 3. Power On: This Red light will remain on when the machine is operating Ozone HOW TO OPERATE 1. Place your air purifier at counter height or higher. This placement will give you the best possible results. This is an electrical device. To reduce the risk of electric shock, never plug the air purifier into an outlet while your hands are wet. Never expose to rain or place the unit in standing water. 2. Plug the AC power cord to an 110Vac or 240Vac outlet. 3. Place unit at least 3" to 6" from a wall or bulkhead, this allows for proper ventilation. 4. Chose Auto or Manual Mo...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: