Войти:
Оценок - 2, средний балл: 3.5 ( )

Инструкция по эксплуатации Hunter Fan, модель 30525

Производитель: Hunter Fan
Размер: 635.9 kb
Название файла: 41960.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Quiet: The air purifier has been designed to operate quietly and efficiently. You can choose among three speeds to best meet your needs at different times. •Filter Counters: Filter maintenance is critical to the performance of the air purifier. To help you determine when to change the filters, the pre-filter and HEPA filter, the unit has built in life counters that keep track of the life remaining of each filter. 3 41960-01 41960-01_rev 1-13-06.pmd 3 1/13/06, 4:50 PM Description of Air Filtration System Description of Air Filtration System How the QuietFlo® HEPA Air Purifier System Works As the air is pulled into the purifier, the activated carbon pre-filter absorbs odors and catches large particles. Then, the air travels through the HEPA filter where the smaller particles are collected. Finally, the clean purified air is released back into the room. Dust & Irritants Pollen & Allergens Odors Bacteria Pet Hair & Dander Carbon True HEPA Filter Pre-Filter 99.97% – .3 Microns Fig. 1 - Illustration of the Air Filtration System Air Purifier Components HOOK TAPE GRILL VENTS HOOK TAPE HEPA FILTER PRE-FILTER CONTROL AREA FRONT GRILL Fig. 2 - Air Purifier Components Fig. 3 - Inside Surface of Front Grill 41960-01 4 41960-01_rev 1-13-06.pmd 4 1/13/06, 4:50 PM Description of Air Filtration System Display and Control Keys The display and control keys allow for easy operation of the air purifier. UP/DOWN KEYS: Adjusts the blower speed and turns the unit on and off. PRE-FILTER RESET: Resets the Carbon Pre-Filter Life Counter. FILTER RESET: Resets the HEPA Filter Life Counter. HEPA FILTER HEPA FILTER BLOWER KEYPAD LOCKED INDICATOR LIFE COUNTER SPEED INDICATOR CARBON PRE-FILTER INDICATOR PRE-FILTER LIFE COUNTER ANIMATED BLOWER Fig. 4 - Air Purifier Control Area and Alpha-numeric Display 5 41960-01 41960-01_rev 1-13-06.pmd 5 1/13/06, 4:50 PM Operation Initial Operation This section provides basic instructions on the use of your air purifier. After following these initial directions, please continue reading this booklet to learn how to operate the more advanced features of your air purifier. Basic Operation of the Air Purifier: 1. Take the air purifier out of the box and remove the clear plastic protective bag. Place the unit on a firm level floor. 2. Before turning on the air purifier, you need to confirm that the filters are firmly in place and have not become loose during shipping. To check the filters, open the front grill by placing your fingers under the handle and pulling the front grill towards you. The front grill will rest open at about 45.. You can remove the front grill by placing your fingers under the handle and pulling the front grill towards you and then up. PULL FORWARD, THEN UP HANDLE Fig. 5 Fig. 6 3. Next, check the HEPA filter by pressing firmly on all four corners of the filter to ensure that it is fully inserted into the filter opening. 4. The carbon pre-filter is mounted inside the front grill with hook tape. Confirm that it properly covers the grill vents. You may notice a few black particles coming off the pre-filter. Those particles are part of the odor-removing activated carbon and will be collected on the filter during use. 5. Place the front grill back onto the unit. First, line up the tabs on the bottom of the grill with the openings on the purifier base and then push the top of the grill forward until it is closed. NOTE: This unit will not operate unless the grill is in the correct position. 41960-01 6 41960-01_rev 1-13-06.pmd 6 1/13/06, 4:50 PM Operation 6. Plug the unit into a 120V electrical outlet and press the UP key. The air purifier will start with a low blower speed. 7. Use the UP/DOWN keys to adjust the blower speed to the desired level (0 = Off, 1 = Low, 2 = Medium, 3 = High). Refer to Fig. 7. Fig. 7 Filter Life Counters The pre-filter and filter are critical to the proper operation of the air purifier. To help you know when to change the filters, your Hunter Air Purifier has Filter Life Counters that will monitor the percentage of life your filter has left. Although the exact life of the filters depends on the environment, the table below gives typical usage times of the filters. Table 2: Typical Usage Times of the Filters Filter Type Typical Usage Activated Carbon Pre-Filter 2000 hours HEPA Filter 8000 hours The display shows the percentage of life left since the counter was reset. NOTE: The percentage level drops in 5% increments. The values of the Pre-Filter and Filter Life Counters are stored in the air purifier’s memory. The unit may be unplugged and moved or stored without losing the Pre- Filter and Filter Counter values. To properly track filter usage, the Pre-Filter and Filter Life Counters should be reset each time the filters are changed. Refer to Changing the Pre-Filter (pg. 9) or Changing the Filter (pg. 10) for instructions on how to reset the counters. 7 41960-01 41960-01_rev 1-13-06.pmd 7 1/13/06, 4:50 PM Programming Locking/Unlocking the Keypad Once you enter the des...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории