Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Hunter Fan, модель 30381

Производитель: Hunter Fan
Размер: 469.18 kb
Название файла: 41733.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Using the Ionizer Using the ionizer improves the quality of air in the room. Negative ions are released into the air and positively charged dust, smoke, and pollen particles are attracted to the negative ions. These particles settle out of the air and can be vacuumed up during normal cleaning. These particles are also more easily captured by the HEPAtech™ filter as they pass through the HEPAtech™ Air Purification System. To ensure the best air circulation in the room, we recommend that you place your air purifier six inches away from any walls. 41733-01 2 © 2005 Hunter Fan Company 41733-01_rev 02.28.05.pmd 2 2/28/05, 4:58 PM 41733-01 3 © 2005 Hunter Fan Company Air Purifier Features 1. On/Speed Control: Press this button to turn the unit ‘on’. When you press it once, the unit will be on low speed. Keep pressing the button to change speeds until you reach the speed you desire. 2. Automatic Shut-off: If you desire the air purifier to shut off automatically, you can set the timer. Press the timer button to choose the amount of time you would like the air purifier to run (1, 2, 4, or 8 hours). Press the button repeatedly to change the length of time. 3. Ionizer: Press this button to turn ‘on’ the ionizer. When the ionizer is ‘on’, the green light to the left of the button will be illuminated. 4. Check Filter: When the check filter light is illuminated, you should open the front grill and compare the filter to the check filter chart. If the filter is dark, you should replace the filter. 5. Reset: When you change the filter, press the reset button. Use the tip of a pen or pencil to press the reset button. AIR PURIFIER PARTS FIGURE 1A FRONT GRILL PREFILTER HEPAtechTM FILTER CONTROL AREA RECESS FOR FINGERS TO PULL OPEN FRONT GRILL TAB HOOK TAPE GRILL VENTS HOOK TAPE Inside View of Front Grill FIGURE 1B 41733-01_rev 02.28.05.pmd 3 2/28/05, 4:58 PM Using Your Air Purifier 1. Remove your air purifier from the box and take it out of the clear plastic protective bag. 2. Place your HEPAtech™ Air Purification System on a firm, flat surface. 3. Before turning the Air Purifier ‘on’, you need to open the front grill. To release the front grill, place your fingers behind the tabs and pull forward. 4. The filter will be installed in the correct position. Grasp the filter and pull it forward. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the wire mesh side should be hidden from view (inside the unit). 5. Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. NOTE: This unit will not operate unless the door is placed in the correct position. 6. Plug the unit into a 120V electrical outlet. Cleaning And Filter Replacement 1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. 2. At least every 90 days, open the front grill, remove the carbon pre-filter, and replace it. This is necessary to maintain proper odor-removing and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier. 3. While replacing the pre-filter, you should view the condition of the HEPAtech Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier. Replacement Filters: To obtain replacement filters for your air purifier, first determine your model number by looking at the information label on the back of the air purifier. The model number will be listed on the label. Then, call 1-800-4HUNTER for your nearest retailer or Hunter Customer Service at 1-800-313-3326 (CAN 1-888-855-8300) to order directly. To order online, visit our Website at To ensure that you obtain the correct filters, please find your model number below that specifies the correct replacement filters. Air Purifier Mdl. No.: 30381 30382 Filter Mdl. No.: 30931 30931 Pre-Filter Mdl. No.: 30901 30901 41733-01 4 © 2005 Hunter Fan Company 41733-01_rev 02.28.05.pmd 4 2/28/05, 4:58 PM 41733-01 5 © 2005 Hunter Fan Company The above is an illustration of how the HEPAtech™ air purification systems work. Dust and other irritants are pulled into the air purification system and cleaned through the HEPAtech™ Filter. Clean, purified air is released into the room. To learn more about Hunter Fan Company products, please see our web page at: WWW. HUNTERFAN.COM Other Home Comfort Products from Hunter Old Time Ceiling Fan The Care-Free Humidifier™ Programmable Thermo...

Эта инструкция также подходит к моделям:
Воздухоочистители - 30382 (469.18 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории