Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The Fresh 'n Clean™ Odor Grabber Max™ appliance features Triple Filtration Technology, an optional ionizer, and HI (III), MEDIUM (II), and LO (I) speed settings. TRIPLE FILTRATION TECHNOLOGY The Fresh 'n Clean™Odor Grabber Max™filter combines zeolite, baking soda, and activated carbon to eliminate pet odors. The zeolite neutralizes acidic odors, while the Arm & Hammer® baking soda absorbs organic odors and the activated carbon battles gaseous odors. The optional ionizer also aids in the removal of pet dander and other airborne contaminants from the air passing through the filter for fresher, cleaner air in your home. The best way to reduce odors is to remove the source. Since most odors originate from pet waste, moisture, and water, it is important to keep a pet’s habitat and litter area dry and clean. This will help reduce the occurrence of odors and maximize the benefit of using the Fresh 'n Clean™ Odor Grabber Max™ appliance. IONIZER Your Fresh 'n Clean™ Odor Grabber Max™ appliance has an optional ionizer, which, when turned on, releases negative ions into outgoing filtered air. Ions are tiny particles that carry a positive or negative charge. These ions exist naturally around us, in the air, water, and ground. Both positive and negative ions are colorless, odorless, and completely harmless. Negative ions help the air purification process by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles that are then more readily captured by the Fresh 'n Clean™ Odor Grabber Max™ filter, or they may be attracted to positively charged surfaces like walls or floors. This may occur more frequently when the filter is nearing the end of its functional life expectancy and is able to capture less of the changed particles. You may also note after extended use, that dust may have collected around the grills or front panel. This is from the ionization affect caused by the negative ions exiting from the air outlet. This is additional evidence of the air cleaning effectiveness of negative ions. The dust can be easily removed with a clean, damp cloth or soft brush. Finally, using your ionizer may result in an occasional popping or cracking sound. This is a normal sound, generally caused by a small build-up of ions that, when discharged, cause the popping or cracking sound. THIS PRODUCT IS EQUIPPED WITH A POLARIZED PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY 4. To release negative ions into the filtered air, slide the ionizer switch to ON (I). The ionizer indicator light illuminates when the ionizer is on. 5. For optimum air filtration, operate the Fresh 'n Clean™ Odor Grabber Max™ appliance continuously. Its rugged motor has been designed to give many years of use. For continuous use, we recommend that you operate the Fresh 'n Clean™ Odor Grabber Max™ appliance on the HI (III) setting. For quieter operation or for use in a bedroom, select the LO (I) setting. CLEANING AND MAINTENANCE INSTRUCTIONS Always turn off and unplug the unit before cleaning. 1. Clean the outside of the Fresh 'n Clean™ Odor Grabber Max™ appliance with a soft, damp cloth. 2. Remove and wash the air inlet grill in warm, soapy water (not dishwasher safe). Dry before replacing on the unit. 3. Remove dust from the top air outlet grill with a small, soft brush. WARNING: Do not allow moisture to come in contact with the main housing of the Fresh 'n Clean™ Odor Grabber Max™ appliance. FILTER REPLACEMENT INSTRUCTIONS Check the condition of the filter every two weeks. If you notice a reduction in odor removal and/or a significant amount of dust or lint, replace the filter. We recommend changing the filter every 3-6 months to ensure optimal performance of your Fresh 'n Clean™ Odor Grabber Max™ appliance. For more intense odors, replace the filter every 2-3 months. 1. Turn off and unplug the unit. 2. Remove the air inlet grill and examine the filter. 3. Slide the Fresh 'n Clean™ Odor Grabber Max™ filter into the unit and replace the grill. DO NOT attempt to wash and re-use the filter. Make sure you remove the protective polybag before inserting the new filter into the Fresh 'n Clean™ Odor Grabber Max™ appliance. Replacement filters are available from your local supplier or by calling 1-800-5-HOLMES. F E AT U R E S - O P E R ATIONS Model Number Number of Filters Needed Filter Number AOR240FC-U 1 AORF30FC-U Figure 1 A. INLET GRILL B. WASHABLE FOAM PRE-FILTER C. SPEED CONTROL D. POWER INDICATOR E. FILTERED AIR OUTLET F. IONIZER CONTROL G. IONIZER LIGHT H. FILTER I. POWER CORD D C E B F G H I A AOR240FC06EM1.qxd 4/20/06 14:12 P...