Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Each filter gives you up to 6 months of filtered water. The filter should be changed after 6 months of use or 10,000 gallons, whichever comes first. SAFETY PRECAUTIONS 1 2 3 Check with your local public works department for plumbing codes. You must follow these guidelines as you install the Water Filtration System. The Commonwealth of Massachusetts plumbing code 248 shall be adhered to. Consult with your licensed plumber for installation of system. Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will damage it. This system is Tested and Certified by NSF International against NSF/ANSI Standard 177 for the reduction of the claims specified on the Performance Data Sheet. SPECIFICATION GUIDELINES Model Service Flow Rate Service Life Pressure Temperature Range GXSM01HWW 2.5 gpm (9.5 lpm) 10,000 gallons (37,900 liters) or 6 months* 20–125 psi (1.4–8.6 bar) 40°–160°F (4.4°–71.1°C) *Filter life varies with local water conditions. INSTALLATION INSTRUCTIONS Remove shower filter from shrink wrap packaging. Remove label off the bottom of the filter base. Remove the existing shower head from the shower pipe. Hold the unit in the final mounting position and connect the shower filtration system to the shower pipe by turning the swivel collar to tighten onto the threads of the shower pipe. Connect the shower head (removed in step 3) on the shower filtration system. Slowly turn on the cold water and check for leaks. Tighten if necessary. Your Water Filtration System will withstand up to 125 pounds per square inch (psi) water pressure. If your house water supply pressure is higher than 125 psi, install a pressure reducing valve before installing the Water Filtration System. WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Discard all unused and packaging material after installation. Small parts remaining after installation could be a choke hazard. INCLUDED COMPONENTS Shower Unit Filter Use and Care/Installation Instructions TOOLS NEEDED None Ref. No. Part No. PARTS LIST Part Description 001 GXSM01HWW Shower Filter System (includes filter) 002 FXSCH Replacement Filter 0999 49-50164 Use and Care/Installation Instructions For replacement parts and pricing in the U.S.: 800.626.2002. In Canada: 866.777.7627. Swivel collar Shower pipe Shower head* Remove the label *Shower head not included. 215C1180P001 49-50164-1 (06--06 JR) 147095 Rev. A GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225 For service in the U.S., contact us at: ge.com or call 800.GE.CARES. In Canada, call toll free, 866.777.7627. 1 OPERATION To receive filtered water, open the water supply. FILTER CARTRIDGE REPLACEMENT Turn off the water to the filtration system. Remove the filter housing by turning counterclockwise. Be sure to support the shower pipe and the filter housing and base during the filter removal to avoid damage to the system. NOTE: Some water may drip from the system during filter cartridge removal. Pull the filter cartridge straight out of the housing and dispose. Remove the label at the bottom of the new filter; insert new filter cartridge into the filter base. Put the housing back on the base by turning the housing clockwise until it locks into place. 6 6 Slowly turn on the water and check for leaks. TROUBLESHOOTING TIPS Troubleshooting Tips Save time and money! Review the chart below first and you may not need to call for service. CLEANING THE SYSTEM Use a damp cloth and mild soap for cleaning. Do not use harsh chemicals, detergents, abrasives, solvents or cleaning fluids, since they will damage the system. Filter housing Filter cartridge O-ring Remove the label O-ring Filter base 3 4 5 Problem Possible Causes What To Do Shower filter unit won’t stay in position Swivel collar not tight enough. • Tighten the swivel collar. Leaking around the shower pipe area Missing gasket in tightening nut. Swivel collar not tight enough. • Use Teflon Tape on shower pipe threads. • Tighten the swivel collar. Gasket not seated in the swivel collar. • Make sure gasket is seated in the swivel collar, then tighten the swivel collar. Housing leaking Filter housing not secured to the base. • Make sure housing is securely attached to the base. Missing O-ring on filter housing. • Return to the store. Filter cartridge housing fits loosely to the base Missing O-ring on replacement filter. • Return to the store. Leaking around shower head Missing gasket in shower. • Use Teflon Tape on shower filter threads. 2 PERFORMANCE DATA GE GXSM01HWW with FXSCH Cartridge Shower Filtration System This system has been tested according to NSF/ANSI 177 for the reduction of free available chlorine. The concentration of free available chlorine in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified ...