Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
2. Effective and energy-saving heat insulation layer Polyurethane foam material for solar water heater is adopted to ensure high heat insulation ability and reduce heat loss to the maximum extent. 3. Al-Zn alloy coated tank shell Al-Zn alloy coated steel plate has very strong anti-corrosion ability and excellent weatherability. It is the most preferred outdoor protective material. 4. Tower type bracket The bracket is made of carbon steel panel by shaping and plastic spraying. It has the advantages of stable structure, beautiful appearance, anti-corrosion and so on. .. Parameters Model Volume of useable water (L) Size of the vacuum tubes Bracket form Quantity of the vacuum tubes Aperture area Total water volume (L) S75ENF 75 ..47X1500(mm) Flat roof, 45. 14 1.33 96 S85ENF 85 ..47X1500(mm) Flat roof, 45. 16 1.52 108 S110ENF 110 ..58X1800(mm) Flat roof, 45. 14 1.86 150 S125ENF 125 ..58X1800(mm) Flat roof, 45. 16 2.13 170 S150ENF 150 ..58X1800(mm) Flat roof, 45. 19 2.53 204 S75ENL 75 ..47X1500(mm) Fastigium, 45. 14 1.33 96 S85ENL 85 ..47X1500(mm) Fastigium, 45. 16 1.52 108 S110ENL 110 ..58X1800(mm) Fastigium, 45. 14 1.86 150 S125ENL 125 ..58X1800(mm) Fastigium, 45. 16 2.13 170 S150ENL 150 ..58X1800(mm) Fastigium, 45. 19 2.53 204 Note: Allowable error for aperture area: ..3%, for volume: ..5%, for other sizes:..10% 2 Safety precautions .. Safety precautions 1. After the vacuum tubes are installed, they should not be sunned empty for long period of time as this will shorten their service life. If the water heater is not put into use after installation, please shade the tubes with proper articles. 2. Initial water filling shall be conducted in the morning or at night when there is insufficient sunlight. Filling water under strong sunshine should be avoided as this will cause explosion of the vacuum tubes. 3. If the water pressure is not high enough, normal water filling will not be realized. Please fit a booster. 4. To avoid burning, do not direct the shower nozzle towards your body while you are adjusting the water temperature. 5. The water heater is a non-pressurized water heater. The hot water flows out naturally due to the height difference between the water tank and the water usage point. The output pressure is proportional to the height difference. If the height difference is too low, it will not function normally. In this case an effluent booster should be fitted. 6. When sunshine is not sufficient, to ensure effect, you should avoid using hot water several times in one day. 7. The energy source of this water heater is solar energy. In cloudy, rainy, or snowy days, the temperature of the water coming from it may not be satisfactory due to insufficient sunshine. 8. Before winter comes, please clean the vacuum tubes and keep their surface clean to improve the heat collecting effect. 9. The vacuum tubes can withstand low temperature of -70.. when they are not filled with water. In winter, on continuous cloudy days or when it is covered with snow, ple...
Эта инструкция также подходит к моделям:Водонагреватели - S110ENF (189.25 kb)
Водонагреватели - S110ENL (189.25 kb)
Водонагреватели - S85ENL (189.25 kb)
Водонагреватели - S125ENF (189.25 kb)