Оценок - 3, средний балл: 5 ( )

Производитель: Empire Comfort Systems Размер: 457.9 kb Название файла: Язык инструкции:

3. The right, middle log (#3) will go directly on the two pins on the right side of the flat portion of the main burner. 4. The left, middle log (#4) should be placed flat on the pin on the left side of the flat portion of the main burner. The left, 2 1 Log Placement VFYR and VFYM -(18, 24, 30)SO Logs Shown Figure 13 middle log will rest on a pin located on the right, middle log. 3 4 RWO Curing Process The logs shipped with this product are formed from a cast refractory material. The curing process for this material won't be completed until after your new burner assembly has fired for a period of time. During this curing period you may notice popping noises and small pieces of material coming from the logset. This is caused by moisture near the surface of the logs and is normal. Anytime your vent-free burner is operating, the screen curtains on the fireplace or firebox should be closed. This is especially true during the first few hours of operation. To help the curing process and achieve maximum strength in the logs, the following procedure is suggested to place a new logset into operation. • After installation and leak testing is complete, burn the logset on low fire for 1/2 hour with the screen curtains closed. • Shut the logset off and allow a 1/2 to 1 hour cooling period. • Burn the logset at a medium fire setting for 1/2 hour. • Allow another 1/2 to 1 hour cooling period. • Burn the logset on the highest fire setting for 1/2 hour. • Allow a final 1/2 to 1 hour cooling period. 12409-2-0403 Page 13 Page 14 12409-2-0403 PROPER INSTALLATION SEQUENCE: VFYR and VFYM-16RWO Logs (Figure 14) 1. Install front, left log (#1) onto the grate. The left end of front, left log must be placed to the outside of left grate. 2. Install front, right log (#3) onto right pin and middle pin on flat portion of main burner. 3. Install middle, left log (#2) onto the left pin on flat portion of main burner. Pivot tip of middle, left log to lay on front, right log. 4. Install rear log (#4) onto two pins on rear log support. Log Placement VFYR and VFYM-16RWO Logs Shown Figure 14 PROPER INSTALLATION SEQUENCE: VFYR and VFYM-(18, 24, 30)RWO Logs (Figure 15) 1. Install front, left log (#1) onto the grate. The left end of front, left log must be placed to the outside of left grate. 2. Install front, right log (#3) onto right pin and middle pin on flat portion of main burner. 3. Install middle, left log (#2) onto the left pin on flat portion of main burner. Pivot tip of middle, left log to lay on front, right log. 4. Install rear log (#4) onto two pins on rear log support. 5. Install top log (#5) onto pin on rear log. Tip of top log will lay on front, right log. Log Placement VFYR and VFYM -(18, 24, 30)RWO Logs Shown Figure 15 LOG PLACEMENT (continued) PLACEMENT OF GLOWING EMBERS AND LAVA ROCK Provided with the log set is a small bag of glowing embers (rock wool) to be placed between logs on the flat metal surface of the burner. Placement of the glowing embers (rock wool) is very individual and light coverage of the areas indicated will provide your best effects. We recommend separation of the rock wool by hand and make your coverage as light and fluffy as possible. Place just enough embers on the burner to obtain the glow and a gold yellow flame. Do not place embers (rock wool) over large ports in rear portion of burner. A thin layer of glowing embers (rock wool) should be placed under open space between the right and left middle logs. Rock wool should not be placed in the area of the pilot assembly. Placing Lava Rock in Front of Grate and Burner Pan on Fireplace Floor Spread lava rocks on fireplace floor in front of grate and burner pan. The lava rocks are for decorative effect and are not required for fireplace operation. ATTENTION: DO NOT PLACE LAVA ROCKS ON LOGS OR ROCK WOOL. THE LAVA ROCKS SHOULD ONLY BE PLACED ON THE FIREPLACE FLOOR. TOP VIEW OF LOG SET REAR LOG Placement of Glowing Embers (rock wool) For All Logs Figure 16 OPERATION INSTRUCTIONS / FLAME APPEARANCE OPERATION INSTRUCTIONS / FLAME APPEARANCE Flames from the pilot (rear right back side of the pan burner) as well as the main flame should be visually checked as the log set is installed. In normal operation at fu...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: