Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
This product is guaranteed for 4 months from the date of installation or 30 months from the date of manufacture, whichever is the shorter, for parts and labour. The second year of the guarantee, from the beginning of the 3th month onwards after installation or manufacture, is conditional upon the product having been serviced by a competent person (i.e. clear skies registered engineer), in accordance with the manufacturer’s recommendations. We strongly recommend regular servicing of your product, but where the condition is not met, any chargeable spare parts or components issued within the applicable guarantee period still benefit from a 12 month warranty from the date of issue by the manufacturer. The “Benchmark” Installation, Commissioning and Service Record must be completed on installation and kept up to date. We recommend you complete and return as soon as possible your guarantee registration card. If your guarantee registration card is missing you can obtain a copy or record your registration by telephoning the Glow-worm Customer Service number 0 773 5965 0. Customer Service: 0 773 5965 0 Technical Helpline: 0 773 8 8300 General and Sales enquiries: Tel. 0 773 8 4639 Fax: 0 773 8 0569 To register your Glow-worm product call: 0800 073 4 These instructions consist of, Installation, Servicing, Fault Finding and Replacement of Parts. The instructions are an integral part of the product and must, be handed to the user on completion of the installation. CONTENTS DESCRIPTION SECTION PAGE INTRODUCTION Warnings Important Information Statutory Requirements Safety Instructions 4 4 5 6 INSTALLATION Product SpecificationsInstallation Commissioning 1 3 6 8 MAINTENANCE Inspection and MaintenanceFault Finding 4 5 9 0 3 WARNINGS SAFETY The flurocyl must be installed by a competent person, who is responsible for adhering to the existing standards and regulations. ALTERATIONS Under no circumstances should you ever attempt to make alterations to these components or any other part of the system SEALED COMPONENTS Under no circumstances must the user interfere with or adjust sealed parts. Important Information Installation and Use Regulations In your own interests and that of safety, it is the LAW that this product is installed by a competent person in accordance with the current issue of these regulations. Control of Substances Hazardous to Health Under Section 6 of The Health and Safety at Work Act 974, we are required to provide information on substances hazardous to health. The adhesives and sealants used in this product are cured and give no known hazard in this state. Manual Handling With regards to the “Manual Handling Operations, 99 Regulations”, the appliance exceeds the recommended weight for a one man lift. Electrical Supply The product MUST be earthed. All system components shall be of an approved type and all wiring to current I.E.E. wiring regulations. External wiring must be correctly earthed, polarised and in accordance with the relevant standards. In GB, this is BS 767 . In IE, this is the current edition of ETCI rules. The product MUST be connected to a permanent 30V ac, 50Hz supply. Connection of the whole electrical system of the product, including any heating controls, to the electrical supply MUST be through one common isolator and must be fused 3 Amp maximum. Isolation should be by a double pole switched fused spur box, with a minimum gap of 3mm for both poles. The fused spur box should be readily accessible and preferably adjacent to the product. It should be identified as to its use. Alternatively connection can be made through an unswitched shuttered socket and 3A fused 3-pin plug both to the current issue of BS 363, provided they are not used in a room containing a bath or shower. Wiring to the product must be PVC 85°C insulated cable, not less than 0.75mm ( 4/0. 0mm). Testing and Certification This product is tested and certificated for safety and performance. It is, therefore, important that no alteration is made to the product, without permission, in writing, by Glowworm. Any alteration not approved by Glow-worm, could invalidate the certification, warranty and may also infringe the current issue of the statutory requirements. CE Mark The CE mark on the Fluropro solar control indicates that it complies with the basic requirements of the applicable directives as stated on the data badge. “Benchmark scheme” Glow-worm support the Benchmark initiative. It is very important that the service record is completed by the installation engineer and handed over to the user. 4 Statutory Requirements IMPORTANT: Where no British Standards exists, materials and equipment should be fit for their purpose and of suitable quality and workmanship. The installation of this product must be carried out by a competent person in accordance the rules in force in the countries of destination. Manufacturer’s instructions must not be taken as overriding statutory requirements. Statutory Requirements In GB, the installation o...
Эта инструкция также подходит к моделям:Водонагреватели - 300 I (1.35 mb)
Водонагреватели - 200 I (1.35 mb)