Войти:
Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации Honeywell, модель HRDE4X4

Производитель: Honeywell
Размер: 1.57 mb
Название файла: HRDE4X4UserGuideV2.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


5. Use the LEFT and RIGHT buttons to change the type of recording to ALL, MOTION, SENSOR, MANUAL, or CONTINUOUS. 6. Once you have selected the type of recording to search for, press SEL to produce a list of instances that fit your search criteria. Figure 4-3 Event Search Screen Rev 2.00 29 Document 900.0399 Figure 4-4 Event Search List Screen 7. Use the UP and DOWN buttons to scroll through the on-screen listings. 8. Use the LEFT and RIGHT buttons to display a list of events that happened previous to or after the current selection. 9. Once the desired event has been selected, press SEL to start playing back the selected video. 10. Press ARCH to launch the archiving function in playback mode (see Archiving Video on page 36 for more information). Time-Line Search The TIME-LINE SEARCH window (see Figure 4-5) is used to find the stored video by using the time line bar. Figure 4-5 Time-line Search Date Select Screen 1. Select the date of the video to begin searching by using the LEFT, RIGHT, UP, and DOWN buttons to navigate through the days. 2. Once you have selected the date, press SEL to move to the time line search window (see Figure 4-6). 3. Use the LEFT or RIGHT buttons to select a time zone on the 24 hours time table. Once you have selected the time zone, press the DOWN or SEL buttons to move to the 60 minutes time table. Rev 2.00 30 Document 900.0399 Figure 4-6 Time-line Search Screen 4. Select All or a specific channel to search by using the UP and DOWN arrow buttons. Notice that the highlighted icon on the lower left side of the screen changes when UP or DOWN is pressed. 5. Once you select the channel, use the LEFT and RIGHT arrow buttons to move the time line select Bar (yellow) to the point on the 60 minute time table that you wish to start playing the video clip (time zones with recorded video are indicated by a red underline). 6. Press SEL to playback the recorded video. 7. Press ARCH to launch the archiving function in playback mode (see Archiving Video on page 36 for more information). Go To Search You can search for video data from a specific instance by setting the date and time in the GO TO search window (see Figure 4-7). Use the LEFT or RIGHT arrow buttons to move through the date and time values in this menu. Use the UP and DOWN arrows buttons to change the date and time values. Press SEL when the appropriate date and time is entered to playback the recorded video. Figure 4-7 Go To Search Screen Rev 2.00 31 Document 900.0399 Go First Search You can access the oldest recorded data on the DVR hard drive by selecting GO FIRST on the SEARCH window. Go Last Search You can access the latest recorded data on the DVR hard drive by selecting GO LAST on the SEARCH window. Log List Search You can access the LOG LIST search screen (see Figure 4-8) by selecting LOG LIST on the SEARCH window. Select a date and press SEL to open the LOG LIST from that date (see Figure 4-9). Figure 4-8 Log List Search Screen Figure 4-9 Log List Screen Rev 2.00 32 Document 900.0399 Archive Search The ARCHIVE SEARCH window (see Figure 4-10) is used to find previously stored video or images. Figure 4-10 Archive Search Screen 1. Select the date to begin searching by using the LEFT, RIGHT, UP, and DOWN buttons to navigate through the days. 2. Once you have selected the date, press SEL to open the list of stored data (see Figure 4-11). Figure 4-11 Archive List Screen 3. Use the UP and DOWN buttons to scroll through the on-screen listings. 4. Use the LEFT and RIGHT buttons to display a list of stored events that happened previous to or after the current selection. 5. Once the desired event has been selected, press SEL to view the still image or the first frame of the selected video. 6. Press ARCH to launch the archiving function in playback mode (see Archiving Video on page 36 for more information). Rev 2.00 33 Document 900.0399 Play Mode During playback of a recorded event, the mode changes from SEARCH to PLAY. While in PLAY mode, you may return to the previous SEARCH screen by pressing ESC. Playback starts in quad mode with channel 1 highlighted by default. If audio is enabled, it will only play from the highlighted channel. Figure 4-12 Play Mode Screen Table 4-3 Button Functions in Play Mode Button Description ESC Return to the previous menu screen, search list, or exit the menu. Press to rewind the footage at 1x, 2x, 4x, 8x, and 16x speeds. Reverse playback speed is shown as ! (normal), 2"• (2 times normal), 4"" (4 times normal), 8"• (8 times normal), and 16"• (16 times normal) at the bottom right of the screen. Jump/Step backward. The playback position moves one minute backward. Press to play or pause recorded video. Jump/Step forward. The playback position moves one minute forward. Press to fast forward the footage at 1x, 2x, 4x, 8x, and 16x speeds. Playback speed is indicated as # (normal), 2$• (2 times normal), 4$• (4 times normal), 8$• (8 times normal), and 16$• (16 times normal) at the bottom right of the screen. 1 View c...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории