Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
4. When you get to the desired option number, quickly press the appropriate button on the remote control according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2 chirps/flashes for button 2, 3 for Button #3 and 4 for button #4. (See Chart below for option descriptions and values.) 5. Turn Ignition off. System chirps and flashes the lights 3 times on exit. When you are finished customizing options, check operation. PROGRAMMING OPTIONS CHART * = Default Setting Option # Option Description BUTTON 1 LOCK BUTTON 2 UNLOCK BUTTON 3 AUX BUTTON 4 SILENT 1. Factory Horn Chirps / Pulses Pulse with trip only Arm/Disarm Chirps & Pulse with trip *Arm/Disarm/Warn Chirp & Pulse w/ trip * 2. Passive Arming ON & OFF Passive Chirp Countdown Ignition & Last Door *OFF* Ignition & Last Door w/ Chirp Countdown Last Door Only 3. Passive Lock / Cust. Override ON *OFF* Custom Override 4. Ignition controlled Locks *ON* OFF Ignition Lock Only 5. 5/60 Sec. Door Open Warning 5 Seconds *60 Seconds* 6. Active Re-Arm (30 Sec.) *ON* OFF 7. Double Unlock Pulse *OFF* ON 8. Silent Arm/Disarm (Chirp Defeat w/button 1 or 2) *OFF* ON 9. Parking Lights on with disarm *ON* OFF 10. Disarm with trunk pop OFF *ON* 11. N/A N/A N/A 12. Door Lock Pulse Time *0.7 Sec.* 3 Sec. 13. Type of Carjack Protection *ACTIVE* PASSIVE FULL-TIME 14. Carjack Enable/Disable *Disable* Enable 15. L/UL or Arm/Disarm w/IGN ON *Lock/Unlock * Arm/Disarm 16. Data Port Protocol 1-Way = OFA, 2-Way = SL *2-Way* 1-Way 10 OPTION PROGRAMMING NOTE: Options can be instantly restored to Factory Default Values. To restore default values: Perform step #1 (See page 10), then press button 3 (trunk). The siren and horn will chirp 4 times and lights will flash 4 times. Turn OFF Ignition. All programming options will be restored to * Default * values (See page 10). 1. HORN CHIRPS / PULSES This option controls the system’s Factory Vehicle Horn output. There are 3 selections: Button 1 (Lock) = Horn Pulse only when alarm is tripped. Button 2 (Unlock) = Horn Chirps for Arm / Disarm and Pulse when tripped. Button 3 (Trunk) = Horn Chirps for Arm, Disarm, and Pre-warning protection. All settings provide horn pulses when triggered. 2. PASSIVE ARMING / CHIRP COUNTDOWN This option controls the Passive (Automatic) Arming feature. If ON, arming will occur 30 Seconds after the ignition is turned off and the last door has been closed. The LED will begin flashing rapidly while counting down. If a door is reopened, the system will wait (LED OFF) for the door or zone to close before arming. The unit will chirp once and flash the lights once. Doors will lock if passive locking is selected. Factory default setting is OFF. If Passive Chirp countdown is selected, the System will produce a siren chirp every 2 seconds during countdown until the system arms. 3. PASSIVE LOCKS / CUSTOM OVERRRIDE PASSIVE LOCKS: This option controls whether the doors will lock when Passive Arming occurs. Note: May increase the risk of locking keys in the vehicle. When selected ON the alarm will passively lock the doors when passive arming. 4. IGNITION-CONTROLLED LOCKS This option controls whether the locks are controlled by Ignition. There are 3 selections: Button 1 (Lock) = Lock/Unlock with vehicle Ignition. Button 2 (Unlock) = No ignition locks. Button 3 (Trunk) = Ignition lock only. Doors will not lock if they are open to prevent locking the keys in. 5. DOOR OPEN WARNING (5 or 60 Seconds) This setting changes the delay time in which the alarm system begins to monitor the Door circuit. This option can prevent the alarm from giving warning chirps on vehicles with a delayed dome light. 11 OPTION PROGRAMMING 6. ACTIVE RE-ARMING Active Re-arming allows the system to re-arm itself 30 seconds after disarmed with the transmitter if a door has not been opened. This is handy if the vehicle is accidentally disarmed (via the Transmitter in your pocket) without you knowing it. Note: Active re-arm is reset by dome light illumination. If you are using dome light illumination, active re-arm will not function. 7. DOUBLE UNLOCK PULSE With this feature enabled, the unit will send 2 unlock pulses when the #2 Unlock button is pressed. 2 pulses are required for interfacing into some existing Factory Keyless Entry or Alarm systems on vehicles such as Nissan, VW, Toyota, and Lexus vehicles. 8. SILENT ARMING /DISARMING (CHIRP DEFEAT) With this feature, the system can be Arm and Disarm without the siren chirp using button #1 & #2. Flashing parking lights will be the only Arm/Disarm confirmation. 9. PARKING LIGHTS ON WITH DISARM Keeps parking lights on instead of 2 flashes when system is disarmed to assist in locating your vehicle in a crowded parking lot or structure. Light will stay on for 30 Sec. or until Ignition is turned on. 10. DISARM WITH AUX. OUTPUT 1 (TRUNK POP) Controls whether the system will or will not DISARM when the trunk pop or AUX. feature is used. When the feature is turned on the unit will DISARM ...