Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
You can control the exposure. .. • .. VB-M600D VB-M600VE Click the desired position in the image and the camera angle will move to center that position on the screen. However, if the position clicked is beyond the range of the pan or tilt, the camera angle will move only in the pan or tilt direction that is within the valid range of movement. Note If the camera moves in a different way from operation control or cannot be set to the range indicated by operation assist, then operation assist may not correspond to the actual camera angle. Click [Control Assist Correction], then try to set the camera angle again. • Changing the Camera Zoom Ratio The zoom ratio is set by using the [Zoom] buttons or [Zoom] slider. [Zoom] buttons Hold down to operate and release to stop. Zoom in. Zoom out. [Zoom] slider Drag the slider. The camera zoom ratio will change according to the position on the slider. Setting Focus and Exposure Compensation • Setting the Focus Use manual operations to focus on a desired position or fix at infinity. In manual operations, you can use the one- shot AF function to focus on the subject. [Manual]: You can adjust the focus manually by continuously pushing the (far) and (near) buttons. Clicking [One-shot AF] will use autofocus to focus on a subject and then stop in manual focus. [Fixed at Infinity]: You can set the focus so that it is fixed near infinity. Setting the Camera Angle Note • One-shot AF may not focus properly on the following subjects. A white wall or other A slanting A subject subject lacking subject reflecting bright/dark contrast strong light A subject consisting A subject having A subject seen of only slant lines or no form, such as through glass horizontal stripes flame or smoke A fast moving A dark area or Subjects both subject night view near and far • After rebooting the camera, it is recommended that you check whether the camera is focusing correctly. • Focus ranges (rough guide) are shown in the table below. Focus Mode Day/Night Setting Day Mode Night Mode 0.3 m (12 in.) .-.1.0 m (3.3 ft.) - Fixed at infinity Point of infinity* * When using an infrared lamp, the camera may be out of focus. • Setting the Exposure You can set the image brightness in seven levels (-3 to +3). To darken the image, select a negative value. To brighten the image, select a positive value. Note • If the camera's Exposure Mode (P. 7-12) was set to [Manual], it will be changed to [Auto] after setting exposure compensation. • The exposure compensation value set with the Camera Angle Setting Tool will not be reflected in [Exposure Compensation] (P. 5-9) in [Camera] on the Setting page. 3 Camera Setting 3-7 Creating a Camera Specification File You can load a camera list in the [Select Camera] dialog box (P. 3-3) if you create a camera specification file which lists connection information for cameras. The camera list allows for simple switching between camera connections for multiple cameras. Create a camera specification file beforehand using a text editor. The file must be saved in CSV file format. • Camera Specification File Content The 1st row in the camera specification file is the header row. Enter a title for each column. Camera information is listed for one camera per row starting from the 2nd row. Enter the following information for each column. Column Content Registered Name The camera name. Displayed in the camera list during connection. Host Name The camera's host name or IP address. Port Number The camera's HTTP port (factory default setting is 80). Administrator User Name The camera's administrator user name (factory default setting is “root”). Administrator Password The camera's administrator password (factory default setting is “camera”). SSL Communications SSL communications: 1 No SSL communications: 0 (factory default setting is 0). Registered Name Host Name Port Number Administrator User Name Administrator Password SSL Communications v vvvvv 1st row > Header row From 2nd row Camera information for 1 camera per RegisterName HostName PortNumber UserName Password ConnectType B1F VB-M700F 192.168.100.1 80 root camera1 0 1Fa VB-M600VE 192.168.100.2 80 root camera2 0 1Fb VB-M600D 192.168.100.3 80 root camera3 0 . ..... line (up to 30 . ..... . ..... cameras) . ..... . ..... Important Up to 30 cameras can be registered. If camera information for more than 30 cameras is listed, an error will occur when the file is loaded into the Camera Angle Setting Tool. Creating a Camera Specification File • Entering in a Text Editor Separate each field with a comma. When you save the file, use the .csv file extension. RegisterName,HostName,PortNumber,UserName,Password,ConnectType B1F VB-M700F,192.168.100.1,80,root,camera1,0 1Fa VB-M600VE,192.168.100.2,80,root,camera2,0 1Fb VB-M600D,192.168.100.3,80,root,camera3,0 2Fa VB-M600D,192.168.100.4,80,root,camera4,0 2Fb VB-M600D,192.168.100.5,80,root,camera5,0 3Fa VB-M700F,192.168.100.6,80,root,camera6,0 R VB-M600VE,192.168.100.7,443,root,camera7,0 Important • Enter ...
Эта инструкция также подходит к моделям:Видеонаблюдение - VB-M600D (14.57 mb)
Видеонаблюдение - VB-M600VE (14.57 mb)