Оценок - 3, средний балл: 3.3
(
)
)
|
Фото и характеристики Canon VB-H610VE |
К этому устройству также есть другие инструкции:
Видеонаблюдение - VB-H610VE (15.44 mb)
Видеонаблюдение - VB-H610VE (358.99 kb)
Видеонаблюдение - VB-H610VE (731.39 kb)
Фрагмент инструкции
(13)[Save settings] Save the set view restriction in the camera. After the view restriction has been set, be sure to save the settings in the camera by clicking [Save settings]. Setting View Restrictions You can set view restrictions by entering values in the view restriction setting entry boxes, or by changing the current settings in the view restriction preview frame of the panorama screen or from the camera angle in the image display area. Select appropriate settings according to the environment in which the camera is operated or the purpose for which it is used. • Use the preview frame on the panorama image to set view restrictions. 1 Select the [Apply the view restriction] checkbox. 2 Drag to change the [Pan/tilt preview frame (red frame)], [Telephoto preview frame (yellow frame)], or [Wide-angle preview frame (green frame)] shown on the panorama screen to set view restrictions. When the telephoto/wide-angle preview frames are enlarged/shrunk, the aspect ratio remains the same. At this time, you can also enter view restrictions by entering values in the view restriction setting entry boxes. If you have adjusted the view restriction settings, click [Display in panorama screen]. The settings are reflected in the preview frame of the panorama screen. 3 Click [Save settings]. Confirm that the settings have been applied correctly, and then click [Save settings] to save the settings in the camera. • Setting by Loading Position Information from Image in Image Display Area 1 Select the [Apply the view restriction] checkbox. 2 Click the [Obtain/Release Camera Control] button to obtain the control privileges of the camera. 3 Operate the camera to adjust the top edge, bottom edge, left edge, right edge, telephoto, or wide angle to desired positions, and click [Get value] each time. The loaded view restriction can be checked in the view restriction setting entry box or view restriction preview frame. 4 Click [Save settings]. The settings are saved in the camera. Important • If you have changed the camera mounting method, recapture the panorama image and register it again. • The panorama screen may be slightly different from the actual image. After view restrictions have been set, be sure to confirm with the VB Viewer that the view restrictions have been reflected correctly. • Confirm the settings using the VB Viewer. (View restrictions are not applied to the image display area of this tool, nor to the Admin Viewer.) • If the image stabilizer or digital zoom setting has been changed, check the view restriction settings again. Note • Even when view restrictions are set, an area outside the view restriction may still appear momentarily when the camera is controlled near the boundary of the view restriction. • To cancel the view restrictions, clear the [Apply the view restriction] checkbox and then click [Save settings]. • If the setting fields are cleared while the [Apply the view restriction] checkbox is selected, the maximum view restriction will be set. • The controllable range and range that can be captured are as follows. View Restriction Setting Tool Pan controllable area Maximum horizontal captured area Maximum wide-angle viewing angle Maximum vertical capture areaTilt controllable area View Restriction Setting Tool Pan controllable area Maximum horizontal captured area Maximum wide-angle viewing angle Maximum vertical capture areaTilt controllable area • The pan and tilt ranges vary depending on the zoom ratio (view angle). Setting view restrictions When wide-angle is selected, automatically restricts the capture of the camera the camera operating operating angle would exceed angle. the view restrictions if it remained the same. Therefore, it is narrowed automatically. 6 Camera operating angle Camera Captured image range • If the view restriction will be exceeded as a result of controlling the zoom toward the wide-angle side, the camera will first pan and tilt to a position where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view restriction area. First, the center of the After panning and maximum wide-angle tilting, wide-angle zoom zoom is panned and control is enabled within Captured image tilted. the view restriction. Admin Tools View restrictions Zoom out Restricted view angle Zoom out • Reducing the view restriction may also reduce the zoom range. 91 Preset Setting Tool A tool that lets you set presets and the home position. You can make the desired settings with the mouse by referring to the preview in the panorama or full image mode. You can also set Preset Tour whereby the camera tours and monitors multiple presets. Set preset tour after the presets have been set. Preset Setting Tool Reflecting in the viewer Executing preset tour Important • If you want to use intelligent functions, it is strongly recommended that you use the Preset Setting Tool to register a preset that corresponds to the camera position of the area wh...
Эта инструкция также подходит к моделям:Видеонаблюдение - VB-H41 (15.05 mb)
Видеонаблюдение - VB-H610D (15.05 mb)
Видеонаблюдение - VB-H710F (15.05 mb)