Войти:
Оценок - 3, средний балл: 4.7 ( )

Инструкция по эксплуатации Panasonic, модель WVCU650

Производитель: Panasonic
Размер: 1.16 mb
Название файла: WVCU650.PDF
Язык инструкции:itensl
Перейти к скачиванию



Фрагмент инструкции


Function Check F1 Camera Setup 101 • • Function Check F8 System Setup 301 Function Check A Cam Func "4096" 501 Function Check B Sys Func "999" 502 Function Check J/S Auto Focus 506 Function Check F1 Camera Setup 101 • • 3. To finish checking the function, press the EXIT or MON (ESC) button. The LCD will return to the normal status. MENU FUNCTION DETAILS MENU FUNCTION DETAILS ¦ Camera Functions . Camera Setup You can display the setup menu of selected camera on the active monitor. Note: The details on the setup menu differ depending on camera models. Refer to the operating instructions of camera. 1 .Display “Camera Setup” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) Camera Setup 101 On Off Rst A.Rst F1 F2 F3 F4 2. Press the F1 button. The setup menu of selected camera will appear on the active monitor, and “s” mark will light up beside “On”. Camera Setup 101 On Off Rst A.Rst F1 F2 F3 F4 3. Perform the camera setting while watching the setup menu on the monitor. Available controls and functions

JogDial clockwise or counterclockwise: Changes the selected parameter. + button: Increases a numeric value. – button: Decreases a numeric value. CAM (SET) button: Determines the selected parameter and moves to the sub menu. MON (ESC) or EXIT button: Returns to the upper menu. F3 button: Displays the special menu. F4 button: Resets all the camera settings to the factory default. 3D joystick upward (^): Moves the cursor up. 3D joystick downward (Ў): Moves the cursor down. 3D joystick to the left (t): Moves the cursor to the left. 3D joystick to the right (s): Moves the cursor to the right. Top button: Determines the selected parameter and moves to the sub menu. 4. Press the F2 button. The setup menu of selected camera will be closed, and “s” mark will go out. . Auto Mode You can activate an auto mode (auto sequence, auto sort, auto pan, and camera patrol) for the selected camera. Note: Refer to the operating instructions of camera for details on auto mode. 1. Display “Auto Mode” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) Auto Mode 102 Seq Sort Pan Patrol F1 F2 F3 F4 2. Select a desired function by pressing one of the F1 to F4 buttons. Auto mode will be activated. Available buttons and functions F1: Seq Activates the sequence mode. F2: Sort Activates the sort mode. F3: Pan Activates the auto pan mode. F4: Patrol Activates the patrol mode. Note: Auto mode will be canceled when you pan or tilt the selected camera by moving the 3D joystick. . BW Mode You can change the color mode of camera images from color to black and white. This function is activated to improve the camera sensitivity when monitoring a dark place. Note: Refer to the operating instructions of camera for details on auto mode. 1. Display “BW Mode” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) BW Mode 103 On Off Auto1 Auto2 F1 F2 F3 F4 2. Press one of the F1 to F4 buttons. BW mode will be activated. Available buttons and functions F1: On Changes the camera image from color to black and white. F2: Off Changes the camera image from black and white to color . F3: Auto1 Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough.) F4: Auto2 Activates Auto 2 mode. (The camera detects the light source type to prevent malfunction. This setting is applicable when using a near-infrared light source in a dark place.) Notes: • The camera detects light source based on the information the CCD image pickup element receives. If an object is continuously moving or has the same color as the background, the object may not be properly recognized. When activating Auto 2 mode, make sure the wavelength of light source is 800 nm or more. • If the available parameters for selected camera are ON, OFF, and AUTO, you can activate AUTO by pressing the F3 button. To recover the color mode Press the F2 button. The color mode is recovered for the camera image. . Patrol Learn You will perform the patrol learn setup. Note: Refer to the operating instructions of camera for details on patrol learn. 1. Display “Patrol Learn” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) Patrol Learn 104 Start Stop 2. Press the F1 button. The patrol learn setup will start. 3. Perform desired camera operations by moving the 3D joystick or zoom wheel controller, etc. The following controls are available for patrol learn. • Panning/Tilting (3D joystick) • Iris control (IRIS OPEN/CLOSE buttons) • Focus control (FOCUS FAR/NEAR buttons) • Zoom control (Zoom wheel controller) • Preset position Note: The available total time of patrol learn differs depending on cameras. When the time is over, the patrol learn setup will automatically stop. 4. To quit the patrol learn setup, press the F2 button. To activate preset positions during the patrol learn To move the camera to a preset position during the patrol learn, you will perform the...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории