Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Otherwise, blooming or smear may when cleaning the camera body. be caused. Use a dry cloth to clean the camera when it is CONNECTIONS SPECIFICATIONS dirty. 7. Do not operate the camera beyond its A. WV-CP240EX (120 V AC 60 Hz) Mounting the Lens Pick-up Device: 768 (H) x 494 (V) pixels, Interline Transfer CCD In case the dirt is hard to remove, use a mild specified temperature, humidity or power Scanning Area: 4.92 (H) x 3.70 (V) mm (Equivalent to scanning area of 1/3" Connect the power cord to an electrical outlet Caution: pick-up tube) detergent and wipe gently. Afterwards, wipe source ratings. of 120 V AC 60 Hz. Before you mount the lens, loosen the screw off the remained part of the detergent in it Use the camera under conditions where tem- Synchronization: Internal, Line-locked or Multiplexed vertical drive (VD2), Color CCTV Camera on the side of the camera, and rotate the selectable with a dry cloth. perature is between –10 °C - +50 °C {14 °F B. WV-CP242EX (12 V DC) flange-back adjusting ring clockwise until it Scanning System: 2 : 1 interlace Connect the power cord to the DC 12 V IN stops. If the ring is not at the end, the inner 122 °F}, and humidity is below 90 %. Scanning: 525 lines / 60 fields / 30 frames 5. Clean the CCD faceplate with care. The input power source is 120 V AC 60 Hz for Operating Instructions terminal on the rear panel of the WV-lens or CCD image sensor may be damaged. Do not clean the CCD with strong or abrasive WV-CP240EX, 12 V DC for WV-CP242EX, and Horizontal: 15.734 kHz CP242EX. q Mount the lens by turning it clockwise on the Vertical: 59.94 Hz lens mount of the camera. detergents. Use lens tissue or a cotton tipped 24 V AC 60 Hz for WV-CP244EX. Horizontal Resolution: 480 TV lines w Connect the lens cable to the ALC Lens applicator and ethanol. Caution: To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the DC 12 V or AC 24 V Input Terminal. Video Output: 1.0 V[P-P] NTSC composite 75 . / BNC connector Model Nos.WV-CP240EX Connector on the side of the camera. Signal-to-Noise Ratio: 50 dB (Equivalent to AGC Off, weight On) Do not aim the camera at bright objects. 6. Never face the camera towards the sun. MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS @! Electronic Light Control: Equivalent to continuous variable shutter speed between 1/60 s WV-CP242EX and 1/15 000 s aim it at the sun or other extremely bright Whether the camera is in use or not, never Minimum Illumination: 1.5 lx {0.15 foot-candle} at F1.4 GND AC 24V IN 1 2 VIDEO OUT VIDEO OUT VIDEO OUT